![background image](/i/samsung/166640/samsung-scc-c6403p/h/samsung-scc-c6403p-021.png)
3-17
E
3. PRESET
This is the menu that user sets the PAN/TILT location, Zoom/Focus, and
screen condition, so the camera can monitor the presetting area on
demand. A total of 128 presets are available.
➜
Press
[Enter]
➜
Press
[Enter]
** MAIN MENU **
CAMERA SET...
VIDEO SET...
PRESET ...
ZONE SET...
AUTO SET...
ALARM SET...
OTHER SET...
SYSTEM INFO...
(PRESET MAP)
0 1 2 3 4
5 6 7 8 9
10 11 12 13 14
15 16 17 18 19
20 21 22 23 24
25 26 27 28 29
30 31
î ï
RET
ID:PRESET 0
PRESET NO.0
POSITION SET ...
PRESET ID
ON...
VIDEO SET
OFF
PRESET SPEED 8
DWELL TIME 3S
IMAGE HOLD OFF
EXIT QUIT
3-16
FOCUS MODE
In the FOCUS MODE MENU, the Focus method can be set to ONEAF
(One Auto Focus), or MF(Manual Focus).
- ONEAF : In the ONEAF mode, it automatically sets the focus after the
PAN/TILT/ZOOM moves, and operates as the same in the MF mode if the
PAN/TILT/ZOOM does not move.
- MF
: In MANUAL FOCUS MODE the user adjusts the Focus manually.
Use the left/right keys to select ONEAF orMF in the FOCUS MODE menu.
(VIDEO SET)
IRIS
ALC...
SHUTTER
OFF
AGC
OFF
WHITE BAL
ATW1
DIS
OFF
FOCUS MODE
ONEAF
SPECIAL
...
EXIT
QUIT
SPECIAL
In SPECIAL menu, you can directly adjust Y-LEVEL, C-LEVEL, and DETAIL
functions.
- Y-LEVEL : It is used to set the levels for the Sync signal and the entire
brightness signal of the video signal.
- C-LEVEL : It is used to set the levels for the Burst signal and the entire colour
signal of the video signal.
- DETAIL
: Controls both horizontal and vertical distinction.
(VIDEO SET)
IRIS ALC...
SHUTTER OFF
AGC ON
WHITE BAL
ATW1
DIS ON
FOCUS MODE
ONEAF
SPECIAL ...
EXIT QUIT
(SPECIAL)
Y-LEVEL (0)I--------
C-LEVEL (0)I--------
DETAIL (0)--I-
RET
EXIT
It's the same as the EXIT function of the CAMERA SET menu.
❈
ONEAF can only be selected if SHUTTER is set to OFF, 1/100(1/120)
~1/10K, or AUTOX2...
In other modes (AUTOX4...~AUTOX128...), FOCUS mode will be
displayed as “MF“(the product automatically switches into MF mode).You
can ’t adjust the settings manually.
❈
ONEAF function may not possible withe types of objects listed below. For
such objects, focus manually.
- High intensity objects or objects illuminated with low lighting
- Obejects shot through wet or dirty glass
- Pictures that are a mixture of distant and nearby objects
- White alls and other single-color objects
- Venetian blinds and other horizontally striped objects
➜
Press
[Enter]