English -
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV.
The performance of the remote control may be affected by bright light.
The product colour and shape may vary depending on the model.
1
POWER : Television Standby
button.
2
NUMERIC BUTTONS : Press to
change the channel.
3
E : Performs the same function
as the
ENTERE key of the
directional keys. When switching
channels with the numeric buttons,
and you press the channel number
and then the
ENTERE key, the
channel is immediately switched.
4
Y : Press to increase or
decrease the volume.
5
SOURCE : Press to display and
select the available video sources.
6
CH LIST : Displays the Channel List
on screen
7
TOOLS : Use to quickly select
frequently used functions.
8
INFO : Press to display information
on the TV screen.
9
COLOURS BUTTONS : Use these
buttons in the Channel list menus
etc.
!
DUAL : Sound effect selection
@
Use these buttons in the DMA and
Anynet+ modes. (∏: This remote
can be used to control recording
on Samsung recorders with the
Anynet+ feature)
#
TV : Selects the TV mode directly.
$
PRE-CH : Enables you to return
to the previous channel you were
watching.
%
MUTEM: Press to temporarily cut
off the sound.
^
P </P > : Press to change
channels.
&
MENU : Displays the main on-screen
menu
*
FAV.CH : Press to switch to your
favourites channels.
(
RETURN : Returns to the previous menu
)
UP▲ / DOWN▼ / LEFT◄ / RIGHT►
/ ENTERE : Use to select on-screen
menu items and change menu values.
a
EXIT : Press to exit the menu.
b
P.SIZE : Picture size selection
c
SRS : SRS TS HD selection.
d
SUBT. : Digital subtitle display
e
GUIDE : Electronic Programme Guide
(EPG) display
Teletext Functions
5
0 : Teletext mode selection (LIST /
FLOF)
6
8 : Teletext store
7
4 : Teletext size selection
8
5 : Teletext reveal
9
Fastext topic selection
0
/ : Alternately select Teletext,
Double, or Mix.
#
: : Exit from the Teletext display
$
1 : Teletext sub page
^
2 : Teletext next page
3 : Teletext previous page
&
6 : Teletext index
(
9 : Teletext hold
a
7 : Teletext cancel
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batteries.
Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the
remote control for a long time.
If the remote control doesn’t work, check the following:
Is the TV power on?
Are the plus and minus ends of the batteries reversed?
Are the batteries drained?
Is there a power outage or is the power cord unplugged?
Is there a special fluorescent light or neon sign nearby?
¦
N
N
N
¦
N
N
N
●
●
●
●
●
1
2
3
4
5
6
7
8
9
0
!
@
#
$
%
^
(
)
a
b
c
d
e
&
*
I-II
BN68-01893F-Eng.indd 5
2009-02-24 �� 2:57:19
