Wireless network setup
156
2. Using a Network-Connected Machine
•
A machine installed with a wireless network interface
•
USB cable
Creating the infrastructure network
1
Check wheter the USB cable is connected to the machine.
2
Turn on your computer, access point, and machine.
3
Insert the supplied software CD into your CD-ROM drive.
If the installation window does not appear, click
Start
>
All programs
>
Accessories
>
Run
.
X:\
Setup.exe
replacing “X” with the letter, which represents your CD-
ROM drive and click
OK
.
4
Review and accept the installation agreements in the installation
window. Then, click
Next
.
5
Select
Wireless network connection
on the
Printer Connection Type
screen. Then, click
Next
.
6
On the
Are you setting up your printer for the first time?
screen, select
Yes, I will set up my printer's wireless network.
Then, click
Next
.
If your printer is already connected on the network, select
No, my
printer is already connected to my network
.
7
After searching, the window shows the wireless network devices. Select
the name (SSID) of the access point you want to use and click
Next
.