![background image](/i/sven/138229/sven-ms-340/h/sven-ms-340-019.png)
Mini-jack to mini-jack
signal cable
Left
speaker
L
R
A
U
DI
O
O
U
T
2RCA to mini-jack
signal cable
Fig. 3. Connection diagram
2RCA to mini-jack signal cable
+ mini-jack to 2RCA adapter
•
To connect the MSS to LINE OUT port of the PC sound card, use a mini-jack to mini-jack signal cable,
if it is available.
•
Adjust master volume control knob
d
on the subwoofer to its minimum (by turning the knob
counterclockwise as far as it would go), then connect the subwoofer to a mains outlet via the built-in
power cord
k
.
•
Switch on the subwoofer by shifting POWER switch
j
into ON position, power LED
a
lights up. Then
turn on the audio source and adjust the subwoofer volume level by master volume control knob
d
, bass
level and treble level by BASS control knob
b
and TREBLE control knob
c
respectively.
•
If headphones are connected, level of their volume can be adjusted by PHONES knob
e
on the
subwoofer control panel.
Notes:
• If you aren’t using the MSS for a long time, please mind to switch it off
j
(position OFF)
on the subwoofer rear panel and unplug it
k
.
• To enhance sound quality, use Line-Out output of the sound card.
• For correct operation of the MSS connect only one audio source at a time!
Power
cord
Audio cable
Audio cable
Right
speaker
PC
PLAYER
CD
DVD
•
Connect the included 2RCA jacks of the signal cable to AUDIO IN
g
L and R jacks of the sub-
woofer, and insert the mini-jack (Ø 3.5 mm) of the signal cable into LINE OUT port of your PC sound
card or OUTPUT of your DVD/CD/
МР
3-player. To connect the device to OUTPUT of the DVD/CD/
MP3-player or TV, use the 2RCA to mini-jack signal cable + mini-jack to 2RCA adapter (included) or
a 2RCA to 2RCA signal cable (not included).
ENG
18
2.1 Multimedia Speaker System