Fig. 4

Fig. 5

Fig. 6

7. CONNECTION AND INSTALLATION

• 

Install the device on even surface (for 

example, on a table) on its 5 suction caps. 

• 

Connect pedal unit to the device (Fig. 3) via 

cable 

q

 of the pedal unit to RJ-11 jack 

p

, then 

connect USB cable 

q

 of the device to the USB 

port of the computer. 

• 

Insert Software CD disk into the disk drive of 

your PC and launch setup.exe to install drivers 

on your PC. There should automatically appear 

Game Controller window on the your PC (Fig. 4). 

Also, there will open up icon LS-USBMX 1 2 3 

Steerin... (Fig. 5) which is convenient for further 

adjustments.

• 

Press Test (Fig. 4), and there will appear 

LS-USBMX 1/2/3 Steering window (Fig. 6) on 

the display of your PC. Here you can make main 

settings of axes and keys.

• 

Choose «Controllers Function» to set axes and 

keys (Fig. 7).

Setting of axes and keys (not compatible with 

OS Vista 64):

–

 Dead Zone Setup: controller will not respond 

to a slight touch of acceleration pedal (Accele- 

rate Y+), or brake pedal (Brake Y-), or turns of 

the wheel (Steering X), therefore necessary 

adjustments should be made by cursors (Fig. 7);

–

 Sensitivity Setup: the higher sensitivity is, the 

swifter and more e

ffi

cient response of controller 

to pressing of pedals and turns of the wheel will 

be, therefore if it is necessary adjustments 

within Lower to Higher range should be made by 

cursors (Fig. 7);

–

 KeyMap Setup reprograms functional keys: 

there should be chosen new necessary assign- 

ment against the key designation (Fig. 7);

18

ENG

Game Racing Wheel