6
USER GUIDE
Thank you for purchasing our Bluetooth™ portable speaker teXet
TPA-2170 BlueFun. Before you start operating the unit, please read
this manual to take full advantage of Bluetooth™ portable speaker
and extend its life. Save this manual to refer to it in the future if
the need arises.
This manual contains information on the technical characteristics
of the device, controls of the Bluetooth™ portable speaker, all
functions and modes of operation.
Note: Due to continuous product improvement, we reserve the right to
modify the software, hardware, and specifications without prior notice
to the end user. Current information is always available on the website
www.texet.eu
1. Start of operation
Press and hold the button
to switch on the BlueFun portable
speaker. Wait for the «Welcome» prompt from the voice menu.
When switched on, the LED light will rapidly flash blue.
The «Search for devices» prompt from the voice menu means
that the BlueFun portable speaker is ready to pair with external
Bluetooth devices.
Repeatedly press and hold the button
to choose different modes
for the BlueFun portable speaker: Bluetooth™, MP3 player, or AUX.
If an audio cable or microSD card is connected when the BlueFun
is switched on, then the AUX or MP3 player mode will start, and the
«Welcome» prompt will be skipped. The voice menu is a function
of the Bluetooth™ mode.
2. Pairs with external Bluetooth™ devices
Attention! The distance between the BlueFun portable speaker and a
paired external device should not exceed 10 meters.
On the external device, enable Bluetooth™ and begin searching for
devices. When the list of discovered devices appears on the screen,
choose «BlueFun» If the external device prompts you for a PIN,