ENG

Thank  you  for  purchasing  our  Bluetooth™  portable  speaker  teXet  TPA-

2171 BlueRock. Before you start operating the unit, please read this 

manual to take full advantage of the Bluetooth™ portable speaker and 

extend its life. Save this manual to refer to it in the future if the need arises.

This manual contains information on the technical characteristics of the 

device,  controls  of  the  Bluetooth™  portable  speaker,  all  functions  and 

modes of operation.

Note: Due to continuous product improvement, we reserve the right to modify 

the  software,  hardware,  and  specifications without  prior  notice  to  the  end 

user. Current information is always available on the website www.texet.eu

1. Start of operation

Press and hold the 

button to switch on the BlueRock portable speaker. 

Wait for the «Welcome» prompt from the voice menu. When switched on, 

the LED light will rapidly flash blue.

The «Search for devices» prompt from the voice menu means that the 

BlueRock  portable  speaker  is  ready  to  pair  with  external  Bluetooth™ 

devices.

Repeatedly press and hold the 

MODE

 button to choose different modes 

for the BlueRock portable speaker: Bluetooth™, MP3 player, or AUX.

If an audio cable or microSD card is connected when the BlueRock is 

switched  on,  then  the  AUX  or  MP3  player  mode  will  start,  and  the 

«Welcome» prompt will be skipped. The voice menu is a function of the 

Bluetooth™ mode.

2. Pairs with external Bluetooth™ devices

Attention! The distance between the BlueRock portable speaker and a paired 

external device should not be more than 10 meters.

On  the  external  device,  enable  Bluetooth™  and  begin  searching  for 

devices. When the list of discovered devices appears on the screen, 

choose «BlueRock.» If the external device prompts you for a PIN, enter 

«0000». Wait for the «Pairing» prompt from the voice menu. The LED light 

will turn blue when the pairing process is complete.

In most cases, when the connection is lost

1

 the BlueRock portable 

speaker will automatically re-pair with your external device. If pairing 

does not begin automatically, then switch the BlueRock portable 

speaker off and then on. You can pair the BlueRock with up to 4 external 

Bluetooth™ devices simultaneously.

3. Plays music files from external Bluetooth™ devices

Play  music  on  your  external  device.  During  playback  the  BlueRock 

portable speaker LED light will slowly flash blue. Use the 

button to 

play and pause files. Use the 

 button to select the previous/next file. 

Files will be played sequentially by folder.

Press and hold the 

 button to adjust the volume.

You can also adjust the volume and select files by using the menu or the 

control buttons on the external device.

4. Receives telephone calls. Hands-free capability

The BlueRock portable speaker allows you to receive calls and provides 

hands-free calling with a built-in loudspeaker and microphone.

When there is an incoming call, playback is paused, and the BlueRock 

loudspeaker will either emit special beeps or play your mobile device’s 

ringtone. Press the 

button to receive the call. Press the 

again to end 

the call and resume playback.

If you need to mute your microphone during a call, press the 

+

 button. 

You will hear a «Mute on» confirmation. Repeatedly press the 

+

 button to 

unmute the microphone. After the «Mute off» confirmation, you will be 

able to continue your conversation.

If you do not want to take the call, you can reject it on your mobile device.

Receiving  calls  is  a  Bluetooth™  function  and  is  not  possible  when  in 

AUX or MP3 mode.

5. MP3 player operation

Insert  the  microSD  card  in  the  microSD  slot.  Playback  will  start 

automatically. Use the 

 buttons to select the previous/next file. Use 

the 

button to pause or resume playback. During playback, the BlueRock 

portable speaker’s LED light will slowly flash blue.

Press and hold the 

 button to adjust the volume.

When switched on, the BlueRock portable speaker recalls all previous 

settings: volume level, current file.

Information about playing MP3 files from external media:

•  File system format for external media: FAT32

•  Maximum memory for external media: 32 Gb

1

 Depending on the model of the external device