![background image](/i/tripp-lite/133169/tripp-lite-pdu3xvn6g20/h/tripp-lite-pdu3xvn6g20-016.png)
16
Features
Outlets:
During normal operation, the outlets distribute AC power to connected equipment.
Note: PDU3VN6G60C does not include C19 receptacles.
Note: NEMA 5-15/20R receptacles are only included with the PDU3VN6L2120/PDU3VN6L2130 models.
Bank Status LED:
Once the unit is powered on, each Bank Status LED
will illuminate when the associated bank is ready to distribute live AC
power.
LED Color
LED Status
Comments/Notes
Green
On
Normal operation.
Yellow
On
Bank’s current has exceeded 80% of its current
rating.
Red
Off
Bank’s voltage is below the Low Voltage
threshold.
Flashing Red
Off
Circuit breaker for this bank has tripped.
Off
Off
Bank is powered off.
Note: Colors noted here reflect standard LED configuration. See chart on page 14
for full LED color definitions.
C13
C19
NEMA 5-15/20R
Circuit Breaker (Select Models):
Each Load Bank is protected by a
circuit breaker. If the connected equipment load exceeds the Maximum
Load Rating for those banks of the PDU, the circuit breaker will trip.
Disconnect excess load and reset the breaker.
Note: Each breaker comes equipped with a
push-to-reset guard
to prevent
accidental breaker tripping. To turn off the breaker, insert a flathead screwdriver into
the reset slot.
Note: PDU3VN6L2120 and PDU3XVN6G20 do not include breakers.
Mounting Brackets:
Use these brackets as an alternate PDU mounting
method.
Mounting Buttons:
Come pre-installed on the back side of the PDU and
are used for toolless mounting.
Note: Four additional mounting buttons
are included for alternate rack styles.
Bank Status LED
Push-to-Reset Guard
PDUMVROTATEBRKT Mounting Accessory:
Use these V-shaped
brackets to mount the PDU with its outlets facing the rear of the rack.
15-09-467-9332F9.indb 16
10/5/2015 11:41:38 AM