![background image](/i/tripp-lite/129182/tripp-lite-pdumv20hvnet-pdumnv32hv2-pdumnv20hv-pdumnv20hv2-pdumv20hvnet2/h/tripp-lite-pdumv20hvnet-pdumnv32hv2-pdumnv20hv-pdumnv20hv2-pdumv20hvnet2-010.png)
10
Configuration and Operation
Remote Monitoring and Control
The PDU provides remote monitoring
A
,
outlet control
B
and more via Web browser,
telnet and SNMP-based Network
Management Systems. For more information
about configuration and operation of the
PDU via the PowerAlert Web browser
interface, refer to the SNMPWEBCARD User's
Guide, included on the CD-ROM bundled
with the PDU.
Features
continued
PS/2 Port:
Use this port to connect a Tripp Lite ENVIROSENSE
environmental sensor to provide remote temperature/humidity
monitoring and a dry contact interface to control and monitor
alarm, security and telecom devices. Visit www.tripplite.com for
ordering information. Note: Do not connect a keyboard or mouse
to this port.
RJ-45 Configuration Port:
Use this port to provide a direct
terminal connection to a computer with a terminal emulation
program. An RJ-45 cable is included with the PDU. If you need a
replacement cable, visit www.tripplite.com for ordering
information.
Ethernet Port:
Use this RJ-45 jack to connect the PDU to the
network with a standard Ethernet patch cable. The Link LED
A
and Status LED
B
indicate several operating conditions, as
shown in the table below.
This port is not compatible with PoE
(Power Over Ethernet) applications.
Network Operating Conditions
A
Link LED Color
Off
No Network Connection
Flashing Amber
100 Mbps Network Connection
Flashing Green
10 Mbps Network Connection
B
Status LED Color
Off
Card Not Initialized
Steady Green
Card Initialized and Operational
Flashing Amber
Error - Card Not Initialized
A
B
A
B
13-11-194-933093.indb 10
12/5/2013 5:22:06 PM