4

ENGLISH

5 Wall Mounting (optional)

See the product specifications for the size of screws to 
use and how far apart to place them.

1

Locate a high position on wall that is free of 
obstructions. Use a sturdy wall.

2

Drill two holes for the screws. Make sure the distance 
between the centers of the holes matches what is 
listed in the product specifications appendix.

"

Be careful to avoid damaging pipes or 
cables located inside the wall when drilling 
holes for the screws.

3

Do not screw the screws all the way into the wall. 
Leave a small gap of about 0.5 cm between the heads 
of the screws and the wall. 

LINK/ 
ACT

On

The port is connected to an Ethernet 
network.

Blinking

The port is receiving or transmitting data.

Off

The port is not connected to an Ethernet 
network.

LED

Status

Description