6
GB
Before use
Thank you for using this ACME humidifier. Before operating the unit, please read the instructions
completely and retain them.
General description (Picture 1)
a. Fog mouth
b. Water retaining piece
c. Water tank
d. Water gauge
e. Cap
f. Power cord
g. Indicating light
h. Upper base
i. Mist volume adjusting knob
Steps for usage
1. Hold water tank tightly and lift it up (Picture 2)
2. Turn the water tank 180 degrees, so the water injecting hole is pointing upwards (Picture 3)
3. Turn the cap counterclockwise (Picture 4)
4. Fill up the water tank (Picture 5)
5. Turn the cap clockwise, ensuring it doesn’t leak (Picture 6)
6. Replace the water tank into the bottom base (Picture 7)
7. Check the voltage, then insert the plug fully (Picture 8)
8. Turn on the switch (Picture 9). Plug on, the unit is on standby. Turn the knob clockwise, the
indicating lights, and mist will emit from the fog mouth. Continue to turn the knob to the 180°,
the mist volume will reach max. The indicator will light up when the water tank lacks water.