Is there a Problem?
GB
8
Green LED does not light up
Have you checked whether :
·
The main switch for the power supply to the apa rt-
ment or home has been tu rned off;
·
The plug is properly inserted in the outl et;
·
The outlet is adequat e; try inserting the pl ug into an-
other outlet in the room.
The refrigerator and the freezer do not cool properly.
Have you checked whether :
·
The doors do not close w ell or the seals are f aulty;
·
The doors are left open too long;
·
The thermostat knob is n ot on the proper setting;
·
The refrigerator or f reezer is overfilled.
The food in the refriger ator becomes too cold.
Have you checked whether :
·
The thermostat knob is on the proper setti ng;
·
The food is in contact w ith the back wall - which is
the coldest part.
The motor runs continuously.
Have you checked whether
·
The doors are not clos ed well or have remained
open too long;
·
The ambient temperatu re is too high;
·
The thermostat knob is n ot on the proper setting.
The appliance makes to o much noise.
The gas refrigerant pr oduces a slight noise ev en when the
compressor is not running (this is not a defect).
Have you checked whether :
·
The refrigerator is lev ell.
·
The appliance was ins talled between cabinets or ob-
jects that vibrate and make noise.
There is water on the bottom of the refrigerator.
Have you checked whether :
·
The hole for draining the water from the fros t is
clogged (see fig. 1).
If after all the check s, the appliance still does not operate
or the problem persis ts, call the nearest S ervice Centre
and inform them of: the type of problem, the a bbreviation
of the model name (Mod.) and th e relative numbers (S /N)
written on the ratin g plate located at the bottom left next
to the vegetable crisper (see examples in th e figures be-
low).
Never call on unauthorized technicians and always re-
fuse spare parts, which are not originals.
Merloni Elettrodomestici spa
Lifetime
10 years
from day of fabrications
- As a result of thermal strain for components of a
refrigerator appliance can be heard cra ckling noise
that is not a defect and doesn ’t affect efficiency of
the appliance. This speci al sound when the
thermoregulator and compre ssor are turned on is a
normal state, which appear s during the working
process of the appliance’s electric installation.
- After some time the col or of indicator lamp can be
changed and color depth can be decreased, i t
should be considered a s natural process and y ou
shouldn’t worry about it.
- Replacing the lamp. The lamp for lighting the
interior of the appliance is located at the ba ck of the
lamp box. Unscrew the burnt lamp and replace it
with another lamp of no mor e than 15 Watt, follow
the instructions ill ustrated in fig. 3
Fig. 3
1
1
2
