10 

How to install your monitor hardware

4. Connect one end of the D-Sub cable to the monitor 

and the other end to your computer.

5. Connect one end of the DVI-D cable to the monitor 

and the other end to the signal connector of your 
computer. (Optional).

6. Connect one end of the USB cable into the second 

plug (from right to left) of the monitor and the other 
end to your computer.

7. Connect the power plug to your monitor.

8. Routing the cables in the Cable Bracket as shown.

9. Plug the other end of the power cord in a nearby wall 

socket.

10. Press the Power button on the side panel of the 

monitor. The power indicator will light up.