8 

How to assemble your monitor hardware  

3. How to assemble your monitor hardware

If the computer is turned on you must turn it off before continuing. 
Do not plug-in or turn-on the power to the monitor until instructed to do so. 

1. Unpack the package and place the monitor stand 

firmly.

2. Attach the monitor to the stand until it locks.

Align the grooves on back of the monitor against the tabs 
on the monitor stand, and then push the monitor forward 
until you hear a clicking sound. 

3. Fully extend and tilt the monitor to rotate it.

The monitor is now locked at the lowest position, and you 
have to press Lock down / release button on the bottom 
rear of stand to move the monitor up to the maximum 
extended position.