Operation

31

2. Pro-Picture menu

Some picture adjustments are available only when certain input sources are in use. 
Unavailable adjustments are not shown on the screen.

FUNCTION 
(default 
setting / value)

DESCRIPTION

Auto Resize 
(on)

Automatically resizes the input signal pixel resolution to the native resolution 
of the projector.
On: The pixel resolution of the input signal is converted to the native 

resolution of the projector (800 x 600). For input signals with lower 

resolutions, gaps in the pixels are automatically interpolated into the image 

before being projected. This may distort the image clarity.

Off: The image is projected as its original resolution, with no pixel conversion. 

For input signals with lower resolutions, the projected image will display 

smaller than if resized to full screen. You could adjust the zoom setting or move 

the projector towards the screen to increase the image size if necessary. You 

may also need to refocus the projector after making these adjustments. 

Aspect Ratio 
(4:3)

There are two aspect ratio settings.

1. 4:3 (for a standard screen)     2. 16:9 (for a wide screen)

16:9 aspect ratio is only sourced through the Component Video input 
when being fed an appropriate 16:9 aspect signal. See

"Connecting a 

Component Video source device" on page 18

and

"Obtaining a 

preferred projected image size" on page 12

for details.

H Position 
(0)

Adjusts the horizontal position 
of the projected image. 

V Position 
(0)

Adjusts the vertical position of 
the projected image. 

Phase 
(depends on 
the selected 
input 
source)

This function allows you to adjust the clock phase 
to reduce image distortion.

H Size (0)

Adjusts the horizontal width of the image.

Sharpness 
(15)

Adjusts the image to make it look sharper or softer.

-30

+30

-30

+30