Maintenance

19

User’s Manual

MAINTENANCE

Lamp Information

Use and Replacement of Lamp

When the Lamp Indicator lights up red or a message displays to suggest the time of lamp 
replacement, please change a new lamp or consult your dealer.An old lamp could cause 
a malfunction to the projector and may explode.

LED Status Indicators    

Caution

The LAMP indicator will light up if the lamp becomes too hot. Turn off the 
power and let the projector cool for 45 minutes. If the LAMP indicator is still 
red when turning the power on, please contact your dealer.

Lamp Replacement

Caution

To reduce the risk of electrical shock, always turn off the projector and dis-
connect the power cord before changing the lamp.   

Lamp Life Indicators

When this LED shows red continuously, it is warning you that 
the lamp life has exceeded 1500 hours. Replace the projec-
tion lamp with a new one immediately.

CHANGE THE LAMP, AND 
RESET THE LAMP TIMER

The lamp has been in operation for 1400 hours. Change a 
new lamp for optimal performance.

CHANGE THE LAMP. THE 
POWER WILL TURN OFF 
AFTER 20 HOURS

The lamp has been in operation for 1480 hours, and the 
power will turn off after 20 hours.

CHANGE THE LAMP!

The lamp has been in operation for over 1500 hours. The 
warning message will display for 30 seconds every 5 minutes 
after you turn on the projector and the power will turn off 
automatically in 10 minutes.

Lamp is not properly attached

LED blinks rapidly.

Temperature is too high 

When the projector’s internal temperature is too hot to 
operate safely, the LED blinks slowly for one minute and the 
lamp turns off automatically.
If the LED light is off, the projector’s lamp and temperature 
are operating under normal conditions.