Инструкция для CADILLAC SRX CROSSOVER (2009)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

High Intensity Discharge (HID)
Lighting

{

CAUTION:

The low beam high intensity discharge lighting
system operates at a very high voltage. If you try to
service any of the system components, you could
be seriously injured. Have your dealer/retailer or a
qualified technician service them.

The vehicle may have HID headlamps. After the
vehicle’s HID headlamp bulb has been replaced,
you may notice that the beam is a slightly different
shade than it was originally. This is normal.

Halogen Bulbs

{

CAUTION:

Halogen bulbs have pressurized gas inside and
can burst if you drop or scratch the bulb. You or
others could be injured. Be sure to read and follow
the instructions on the bulb package.

Windshield Wiper Blade
Replacement

Windshield wiper blades should be inspected for wear
or cracking. See Scheduled Maintenance on page 6-4
for more information.

It’s a good idea to clean or replace the wiper blade
assembly on a regular basis or when worn. For proper
windshield wiper blade length and type, see
Maintenance Replacement Parts on page 6-15.

To replace the wiper blade assembly, do the following:

1. Turn the ignition to ON/RUN with the engine off.

2. Turn on the windshield wipers and turn them off

again when the wipers are in the out-wipe position.
The driver side blade will be straight up and down on
the windshield.

3. Pull the windshield wiper assembly away from the

windshield.

5-46