54

System settings

To initialize all settings of SONAR V-STUDIO 100 to their 

factory-set state, proceed as follows.

The data in the SD memory card will not be initialized.

1.

Power-off the SONAR V-STUDIO 100.

2.

While holding down the [ACT]/[V-LINK] button and 

the compressor/equalizer setting button, power-

on the SONAR V-STUDIO 100.

fig.FReset.eps

3.

When the screen indicates “Factory Reset,” release 

the [ACT]/[V-LINK] button and the compressor/

equalizer setting button.

The system setting screen lets you change various settings to 

specify how the SONAR V-STUDIO 100 will operate.

1.

Hold down the [DISPLAY] button for approximately 

one second; the system setting (UTILITY) screen 

appears.

2.

Turn the [CURSOR/VALUE] knob to move the cursor 

to the parameter that you want to change.

fig.SetSampleFreq1.eps

3.

Press the [CURSOR/VALUE] knob to highlight the 

value of that parameter.

fig.SetSampleFreq2.eps

4.

Turn the [CURSOR/VALUE] knob to change the 

value.

5.

Press the [CURSOR/VALUE] knob to confirm the 

change.

6.

Press the [DISPLAY] button to return to the 

previous screen.

Initializing the system settings 
(Factory Reset)

Other settings

Operations in the system setting screen

VS-100_r_e.book 54 ページ ２００９年３月２５日　水曜日　午前９時３４分