![background image](/i/canon/156871/canon-eos-550d/h/canon-eos-550d-118.png)
118
Using AF to Focus
The dedicated AF sensor is used to focus in the One-Shot AF mode
(p.66), using the same AF method as with viewfinder shooting.
Although you can focus the target area quickly,
the Live View image
will be interrupted momentarily during the AF operation
.
1
Display the Live View image.
Press the <
A
> button.
X
The Live View image will appear on
the LCD monitor.
The small boxes on the screen are
the AF points, and the larger box is
the magnifying frame.
2
Select the AF point.
N
When you press the <
Q
> button, the
Quick Control screen will appear.
X
The settable functions will be
highlighted in blue.
Press the <
U
> key to make the AF
point selectable.
Turn the <
6
> dial to select the AF
point.
Quick Mode:
f
AF point
Magnifying frame
COP
Y
Оглавление инструкции
- Страница 1 из 261
C Y P O INSTRUCTION MANUAL E E The “Quick Reference Guide” and “Software Start Guide” are provided at end of this manual. INSTRUCTION MANUAL - Страница 2 из 261
Introduction The EOS REBEL T2i/EOS 550D is a high-performance, digital singlelens reflex camera featuring a fine-detail CMOS sensor with 18.0 effective megapixels, DIGIC 4, high-precision and high-speed 9-point AF, approx. 3.7 fps continuous shooting, Live View shooting, and Full HD (Full - Страница 3 из 261
Item Check List Before starting, check that all the following items have been included with your camera. If anything is missing, contact your dealer. Camera (with eyecup and body cap) Wide Strap EW-100DB III EOS DIGITAL Solution Disk (Software) Battery Pack LP-E8 (with protective cover) Y P O - Страница 4 из 261
Conventions Used in this Manual Icons in this Manual <6> : Indicates the Main Dial. <V> <U> : Indicates the <S> cross keys. <0> : Indicates the setting button. 0, 9, 7, 8 : Indicates that the respective function remains active for 4 sec., 6 sec., 10 sec., or 16 sec. respectively after you let go of - Страница 5 из 261
Chapters For first-time DSLR users, Chapters 1 and 2 explain the camera’s basic operations and shooting procedures. Introduction 2 Camera basics. 1 2 3 4 5 6 7 8 9 10 11 Getting Started 23 Basic Shooting and Image Playback Fully automatic shooting for different subjects. Creative Shooting Basic - Страница 6 из 261
Contents Introduction 2 Item Check List.................................................................................................. 3 Conventions Used in this Manual ...................................................................... 4 Chapters - Страница 7 из 261
Contents 3 Creative Shooting 59 d: Program AE................................................................................................60 Z: Changing the ISO Speed .........................................................................62 D Using the Built-in Flash - Страница 8 из 261
Contents 5 Shooting with the LCD Monitor (Live View Shooting) 107 A Shooting with the LCD Monitor ............................................................... 108 Shooting Function Settings ........................................................................... 111 Using AF to Focus - Страница 9 из 261
Contents Slide Show (Auto Playback)...........................................................................165 Viewing the Images on TV .............................................................................167 K Protecting Images - Страница 10 из 261
Contents at a Glance Shooting Shoot automatically Î p.45 - 57 (Basic Zone modes) Shoot continuously Î p.50, 53, 70 (i Continuous shooting) Take a picture of yourself in a group Î p.71 (j Self-timer) Freeze the action Blur the action Î p.78 (s Shutter-priority AE) Blur the background Keep the - Страница 11 из 261
Make a large-size print of the picture Î p.72 (73, 83, 1) Take many pictures Î p.72 (76, 86) Focusing Change the point of focus Î p.68 (S AF point selection) Shoot a moving subject Î p.53, 67 (AI Servo AF) Playback Y P O View the images with the camera Î p.58 (x Playback) Search for pictures - Страница 12 из 261
Handling Precautions Camera Care This camera is a precision instrument. Do not drop it or subject it to physical shock. The camera is not waterproof and cannot be used underwater. If you accidentally drop the camera into water, promptly consult your nearest Canon Service Center. Wipe off any water - Страница 13 из 261
Handling Precautions LCD Monitor Although the LCD monitor is manufactured with very high precision technology with over 99.99% effective pixels, there might be a few dead pixels among the remaining 0.01% or less pixels. Dead pixels displaying only black or red, etc., are not a malfunction. They do - Страница 14 из 261
Quick Start Guide Insert the battery. (p.26) To charge the battery, see page 24. 1 2 3 4 5 14 White index Red index Attach the lens. (p.33) Align the lens’ white or red index with the camera’s index in the matching color. Y P O Set the lens focus mode switch to <AF>. (p.33) C Open the slot cover - Страница 15 из 261
Quick Start Guide Set the Mode Dial to <1> (Full Auto). (p.46) 6 All the necessary camera settings will be set automatically. Focus the subject. (p.37) 7 8 9 Look through the viewfinder and aim the viewfinder center over the subject. Press the shutter button halfway, and the camera will focus the - Страница 16 из 261
Nomenclature The names in bold indicate the parts mentioned up until the “Basic Shooting and Image Playback” section. Built-in flash/AF-assist beam (p.64/147) Mode Dial (p.20) Power switch (p.27) EF Lens mount index (p.33) <Z> ISO speed setting button (p.62) EF-S Lens mount index (p.33) Flash-sync - Страница 17 из 261
Nomenclature Eyecup (p.205) Dioptric adjustment knob (p.36) <A> Live View shooting/ Movie shooting button (p.108/124) Viewfinder eyepiece Display-off sensor (p.146) <A/I> AE lock/ FE lock button/ Index/Reduce button (p.97/98/156/158,183) <B> Shooting settings display button (p.44,110,126, 143,173) - Страница 18 из 261
Nomenclature Shooting Settings Display Exposure level indicator Exposure compensation amount (p.87) AEB range (p.89) Aperture c Main Dial pointer (p.77) ISO speed (p.62) Shutter speed Flash exposure compensation (p.88) Highlight tone priority (p.194) Picture Style (p.75) Shooting mode - Страница 19 из 261
Nomenclature Viewfinder Information Spot metering circle AF point activation indicator < > AF points Focusing screen <Z> ISO speed <A> AE lock/ AEB in-progress <D> Flash-ready Improper FE lock warning C <e> High-speed sync (FP flash) <d> FE lock/ FEB in-progress <y> Flash exposure compensation Y P - Страница 20 из 261
Nomenclature Mode Dial The Mode Dial includes the Basic Zone modes, Creative Zone modes, and Movie shooting mode. Creative Zone These modes give you more control for shooting various subjects. d : Program AE (p.60) s : Shutter-priority AE (p.78) f : Aperture-priority AE (p.80) a : Manual exposure - Страница 21 из 261
Nomenclature Lens Lens without a distance scale Focus mode switch (p.33) Focusing ring (p.69,120) Zoom ring (p.34) Zoom position index (p.34) Hood mount (p.231) Filter thread (front of lens) (p.231) Image Stabilizer switch (p.35) Y P O Lens mount index (p.33) Lens with a distance scale Hood mount - Страница 22 из 261
Nomenclature Battery Charger LC-E8 Charger for Battery Pack LP-E8 (p.24). Power plug Battery pack slot Charge lamp Full-charge lamp IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a - Страница 23 из 261
Getting Started Y P O This chapter explains preparatory steps before you start shooting and basic camera operations. C Attaching the Strap Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration. Pull - Страница 24 из 261
Charging the Battery 1 Remove the protective cover. the battery. 2 Attach As shown in the illustration, attach the battery securely. To detach the battery, follow the above procedure in reverse. LC-E8 the battery. 3 Recharge For LC-E8 Y P O As shown by the arrow, flip out the battery charger’s - Страница 25 из 261
Charging the Battery Tips for Using the Battery and Charger Recharge the battery on the day before or on the day it is to be used. Even during storage, a charged battery will gradually discharge and lose its power. After recharging the battery, detach it and unplug the charger from the power - Страница 26 из 261
Installing and Removing the Battery Installing the Battery Load a fully charged Battery Pack LP-E8 into the camera. 1 Open the battery compartment cover. Slide the lever as shown by the arrow and open the cover. the battery. 2 Insert Insert the end with the battery contacts. Insert the battery - Страница 27 из 261
Turning on the Power If the date/time setting screen appears when you turn on the power switch, see page 29 to set the date/time. <1> : The camera turns on. <2> : The camera is turned off and does not operate. Set to this position when not using the camera. About the Automatic Self-Cleaning Sensor - Страница 28 из 261
Turning on the Power Checking the Battery Level When the power switch is set to <1>, the battery level will be indicated in one of four levels: z : Battery level is OK. x : Battery level is slightly down, but adequate power remains. c : Battery will be exhausted soon. n : Battery must be recharged. - Страница 29 из 261
3 Setting the Date and Time When you turn on the power for the first time or if the date/time has been reset, the Date/Time setting screen will appear. Follow steps 3 and 4 to set the date/time. Note that the date/time appended to recorded images will be based on this date/time setting. Be sure to - Страница 30 из 261
3 Selecting the Interface Language 1 Display the menu. Press the <M> button to display the menu. the [6] tab, select 2 Under [LanguageK]. Press the <U> key to select the [6] tab. Press the <V> key to select [LanguageK] (the third item from the top), then press <0>. C Y P O the desired language. 3 - Страница 31 из 261
Installing and Removing the SD Card The captured images are recorded onto the card (sold separately). Make sure the card’s write protect switch is set upward to enable writing/erasing. Installing the Card 1 Write protect switch Open the cover. Slide the cover as shown by the arrow to open it. the - Страница 32 из 261
Installing and Removing the SD Card Removing the Card 1 Access lamp Open the cover. Set the power switch to <2>. Check that “Recording...” is not displayed on the LCD monitor. Make sure the access lamp is off, then open the cover. the card. 2 Remove Gently push in the card, then let go. The card - Страница 33 из 261
Attaching and Detaching a Lens Attaching a Lens 1 Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows. the lens. 2 Attach Align the lens’ red or white index with White index the camera’s index matching the same color. Turn the lens as shown by the arrow - Страница 34 из 261
Attaching and Detaching a Lens About Zooming To zoom, turn the zoom ring on the lens with your fingers. If you want to zoom, do it before focusing. Turning the zoom ring after achieving focus may throw off the focus slightly. Detaching the Lens While pressing the lens release button, turn the lens - Страница 35 из 261
About the Lens Image Stabilizer When you use the IS lens’ built-in Image Stabilizer, camera shake is corrected to obtain a less blurred shot. The procedure explained here is based on the EF-S18-55mm f/3.5-5.6 IS lens as an example. * IS stands for Image Stabilizer. 1 Set the IS switch to <1>. Set - Страница 36 из 261
Basic Operation Adjusting the Viewfinder Clarity Turn the dioptric adjustment knob. Turn the knob left or right until the nine AF points in the viewfinder look sharp. If the camera’s dioptric adjustment still cannot provide a sharp viewfinder image, using Dioptric Adjustment Lens E (10 types, sold - Страница 37 из 261
Basic Operation Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing halfway This activates autofocusing and automatic exposure metering that sets the shutter speed and aperture. The exposure - Страница 38 из 261
Q Using the Quick Control Screen You can directly select and set the shooting functions displayed on the LCD monitor. This is called the Quick Control screen. 1 Display the Quick Control screen. When the shooting settings are displayed, press the <Q> button. X The Quick Control screen will activate - Страница 39 из 261
Q Using the Quick Control Screen Quick Control Screen Nomenclature Aperture (p.80) ISO speed (p.62) Highlight tone priority* (p.194) Shutter speed (p.78) Exposure compensation/ AEB setting (p.89) Flash exposure compensation (p.88) Auto Lighting Optimizer (p.103) Shooting mode* (p.20) - Страница 40 из 261
3 Menu Operations You can set various functions with the menus such as the image-recording quality, date/time, etc. While looking at the LCD monitor, use the <M> button, <S> cross keys, and <0> button on the camera back. <M> button <0> button LCD monitor <S> Cross keys Menu Screen Basic Zone modes - Страница 41 из 261
3 Menu Operations Menu Setting Procedure 1 Display the menu. Press the <M> button to display the menu. a tab. 2 Select Press the <U> key to select a tab. You can also turn the <6> dial to select a tab. the desired item. 3 Select Press the <V> key to select the item, then press <0>. Y P O the - Страница 42 из 261
3 Formatting the Card If the card is new or was previously formatted by another camera or computer, format the card with the camera. When the card is formatted, all images and data in the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. If - Страница 43 из 261
3 Formatting the Card Execute [Format] in the following cases: The card is new. The card was formatted by a different camera or a computer. The card is full with images or data. A card-related error is displayed (p.224). About Low-level Formatting Do low-level formatting if the card’s recording or - Страница 44 из 261
Switching the LCD Monitor Display The LCD monitor can display the shooting settings screen, menu screen, image, etc. Shooting Settings Displayed when the camera is turned on. When your eye nears the viewfinder eyepiece, the display-off sensor (p.17, 146) turns off the LCD monitor automatically. - Страница 45 из 261
Basic Shooting and Image Playback Y P O This chapter explains how to use the Basic Zone modes on the Mode Dial for best results and how to playback images. With the Basic Zone modes, all you do is point and shoot and the camera sets everything automatically (p.210). Also, to prevent botched - Страница 46 из 261
1 Fully Automatic Shooting 1 AF point Set the Mode Dial to <1>. any AF point over the 2 Aim subject. All the AF points will be used to focus, and generally the closest object will be focused. Aiming the center AF point over the subject will make focusing easier. the subject. 3 Focus Press the - Страница 47 из 261
1 Fully Automatic Shooting FAQ The focus confirmation light <o> blinks and focus is not achieved. Aim the AF point over an area having good contrast, then press the shutter button halfway (p.202). If you are too close to the subject, move away and try again. Sometimes multiple AF points flash - Страница 48 из 261
1 Full Auto Techniques Recomposing the Shot Depending on the scene, position the subject toward the left or right to create a balanced background and good perspective. In the <1> (Full Auto) mode, while you press the shutter button halfway to focus a still subject, the focus will be locked. You can - Страница 49 из 261
7 Disabling Flash In places where flash photography is prohibited, use the <7> (Flash Off) mode. This mode is also effective for candlelight scenes when you want to capture the ambient light. Shooting Tips C Y P O If the numeric display in the viewfinder blinks, take care to prevent camera shake. - Страница 50 из 261
2 Shooting Portraits The <2> (Portrait) mode blurs the background to make the human subject stand out. It also makes flesh tones and the hair look softer than with the <1> (Full Auto) mode. Shooting Tips C Y P O The farther the distance between the subject and background, the better. The further - Страница 51 из 261
3 Shooting Landscapes Use the <3> (Landscape) mode for wide scenery, night scenes, or to have everything in focus from near to far. The greens and blues also become more vivid and sharper than with <1> (Full Auto). Shooting Tips C Y P O With a zoom lens, use the wide-angle end. When using the - Страница 52 из 261
4 Shooting Close-ups When you want to photograph flowers or small things up close, use the <4> (Close-up) mode. To make small things appear much larger, use a macro lens (sold separately). Shooting Tips C Y P O Use a simple background. A simple background makes the flower, etc., stand out better. - Страница 53 из 261
5 Shooting Moving Subjects To photograph a moving subject, whether it is a child running or a moving vehicle, use the <5> (Sports) mode. Shooting Tips Y P O Use a telephoto lens. Using a telephoto lens is recommended so you can shoot from afar. C Use the center AF point to focus. Aim the center AF - Страница 54 из 261
6 Shooting Portraits at Night To shoot someone at night and obtain a natural-looking exposure in the background, use the <6> (Night Portrait) mode. Shooting Tips Y P O Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to obtain a wide night view. Also, use a tripod - Страница 55 из 261
C Creative Auto Shooting Basic Zone modes except <C> (Creative Auto) take care of everything, whereas the <C> Creative Auto mode enables you to easily change the picture’s brightness, depth of field, color tone (Picture Style), etc. The default settings are the same as the <1> (Full Auto) mode. * - Страница 56 из 261
C Creative Auto Shooting Shutter speed and aperture (1) (2) (3) (4) (5) (6) Possible shots Battery check (1) Flash firing Y P O <a> (Auto flash), <D> (Flash on), or <b> (Flash off) can be selected. If you set <b> (Flash off), see “Disabling Flash” on page 49. C (2) Blurring/sharpening the - Страница 57 из 261
C Creative Auto Shooting (4) Image effects Besides the standard image effect, you can set it for portraits, landscapes, or black-and-white photos. (p.75: Picture Style) <P> (Standard): Standard image effect applicable to most scenes. <Q> (Smooth skin tones): Effective for close-ups of women or - Страница 58 из 261
x Image Playback The easiest way to playback images is explained below. For more details on the playback procedure, see page 155. 1 Playback the image. When you press the <x> button, the last captured image will be displayed. the image. 2 Select To view images starting with the last image, press - Страница 59 из 261
Creative Shooting Y P O In the Basic Zone modes, to prevent spoiled shots, most functions are set automatically and cannot be changed. In the <d> (Program AE) mode, you can set various functions and be more creative. C In the <d> (Program AE) mode, the camera sets the shutter speed and aperture - Страница 60 из 261
d: Program AE To obtain a good exposure of the subject, the camera sets the exposure (shutter speed and aperture) automatically. This is called Program AE. 1 Set the Mode Dial to <d>. the subject. 2 Focus Look through the viewfinder and aim the selected AF point over the subject. Then press the - Страница 61 из 261
d: Program AE Shooting Tips Change the ISO speed or use the built-in flash. To match the subject and ambient lighting level, you can change the ISO speed (p.62) or use the built-in flash (p.64). In the <d> mode, the built-in flash will not fire automatically. So under low light, press the <I> - Страница 62 из 261
Z: Changing the ISO SpeedN Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. In the Basic Zone modes, the ISO speed is set automatically (p.63). 1 Press the <Z> button. (9) X [ISO speed] will appear. the ISO speed. 2 SetTurn the <6> dial or press the <U> key - Страница 63 из 261
Z: Changing the ISO SpeedN About “AUTO” for Automatic ISO Speed If the ISO speed is set to “AUTO”, the actual ISO speed to be set will be displayed when you press the shutter button halfway. As indicated below, the ISO speed will be set automatically to suit the shooting mode. Shooting Mode ISO - Страница 64 из 261
D Using the Built-in Flash In indoors, low light, or backlit conditions in daylight, just pop up the built-in flash and press the shutter button to take flash pictures. In the <d> mode, the shutter speed (1/60 sec. - 1/200 sec.) will be set automatically to prevent camera shake. 1 Press the <D> - Страница 65 из 261
D Using the Built-in Flash Shooting Tips If the subject is far away, increase the ISO speed. By increasing the ISO speed, you can extend the flash range. In bright light, decrease the ISO speed. If the exposure setting in the viewfinder blinks, decrease the ISO speed. Detach the lens hood and keep - Страница 66 из 261
E: Changing the AF ModeN You can select the AF mode suiting the shooting conditions or subject. In the Basic Zone modes, the optimum AF mode is set automatically. 1 On the lens, set the focus mode switch to <AF>. the <ZE> button. 2 Press X [AF mode] will appear. the AF mode. 3 Select Press the <U> - Страница 67 из 261
E: Changing the AF ModeN If focus cannot be achieved, the focus confirmation light <o> in the viewfinder will blink. If this occurs, a picture cannot be taken even if the shutter button is pressed completely. Recompose the picture and try to focus again. Or see “When Autofocus Fails” (p.202). If - Страница 68 из 261
S Selecting the AF PointN In the Basic Zone modes, all the AF points are active. Generally, the AF point covering the closest subject will be selected to focus. Therefore, the camera sometimes may not focus the subject you want. With the <d> (Program AE), <s>, <f>, and <a> modes, you can select one - Страница 69 из 261
S Selecting the AF PointN Shooting Tips When shooting a portrait up close, use One-Shot AF and focus the eyes. If you focus the eyes first, you can then recompose and the face will remain sharp. If it is difficult to focus, select and use the center AF point. The center AF point is the most - Страница 70 из 261
i Continuous ShootingN You can shoot up to about 3.7 shots per sec. This is effective for shooting a child running toward you or capturing the different facial expressions. 1 Press the <YiQ> button. <i>. 2 Select Press the <U> key to select <i>, then press <0>. 3 Shooting Tips Take the picture. The - Страница 71 из 261
j Using the Self-timer 1 Press the <YiQ> button. the self-timer. 2 Select Press the <U> key to select the desired self-timer, then press <0>. Q: 10-sec. self-timer The remote control can also be used. (p.204) l: 2-sec. self-timerN (p.106) q: 10-sec. self-timer plus continuous shots Press the <V> - Страница 72 из 261
3 Setting the Image-recording Quality You can select the number of megapixels to record (approx. 17.9, 8.0, or 4.5 megapixels) and the image quality. 1 Select [Quality]. Under the [1] tab, select [Quality], then press <0>. X [Quality] will appear. the image-recording quality. 2 Select For your - Страница 73 из 261
3 Setting the Image-recording Quality FAQ I want to select the image-recording quality matching the paper size for printing. Refer to the diagram on the left when Paper size choosing the image-recording quality. If A3 (42x29.7cm/16.5x11.7in.) you want to crop the image, selecting a 73 higher - Страница 74 из 261
3 Setting the Image-recording Quality About 1 1 is the raw image data before it is made into 73 or other images. Although 1 images require software like Digital Photo Professional (provided) so they can be displayed on the computer, they also offer flexibility for image adjustments possible only - Страница 75 из 261
A Selecting a Picture StyleN By selecting a Picture Style, you can obtain image effects matching your photographic expression or the subject. 1 Press the <XA> button. X [Picture Style] will appear. a Picture Style. 2 Select Press the <U> key to select a Picture Style, then press <0>. the picture. 3 - Страница 76 из 261
A Selecting a Picture StyleN S Neutral This Picture Style is for users who prefer to process images with their computer. For natural colors and subdued images. U Faithful This Picture Style is for users who prefer to process images with their computer. When the subject is captured under a color - Страница 77 из 261
Advanced Shooting Y P O This chapter builds on the previous chapter and introduces more ways to shoot creatively. The first half of this chapter explains how to use the <s> <f> <a> <8> modes on the Mode Dial. Except for <8>, all the shooting modes can be used in combination with the functions - Страница 78 из 261
s: Action Shots You can either freeze the action or create motion blur with the <s> (Shutter-priority AE) mode on the Mode Dial. * <s> stands for Time value. Frozen action (Fast shutter speed: 1/2000 sec.) 1 Blurred motion (Slow shutter speed: 1/30 sec.) Set the Mode Dial to <s>. Y P O the desired - Страница 79 из 261
s: Action Shots Shooting Tips To freeze the action or moving subject. Use a fast shutter speed such as 1/4000 sec. to 1/500 sec. To blur a running child or animal giving the impression of fast movement. Use a medium shutter speed such as 1/250 sec. to 1/30 sec. Follow the moving subject through the - Страница 80 из 261
f: Changing the Depth of Field To obtain a blurry background or to make everything near and far look sharp, set the Mode Dial to <f> (Aperture-priority AE) to adjust the depth of field (range of acceptable focus). * <f> stands for Aperture value which is the size of the diaphragm hole inside the - Страница 81 из 261
f: Changing the Depth of Field Shooting Tips When using an aperture with a high f-number, note that camera shake can occur in low light scenes. A higher aperture f-number will make the shutter speed slower. Under low light, the shutter speed can be as long as 30 sec. In such cases, increase the ISO - Страница 82 из 261
f: Changing the Depth of Field Using the Built-in Flash To obtain a correct flash exposure, the flash output will be set automatically to match the set aperture (autoflash exposure). The shutter speed will be set automatically between 1/200 sec. - 30 sec. to suit the scene’s brightness. In low - Страница 83 из 261
a: Manual Exposure You can set both the shutter speed and aperture manually as desired. With flash, the flash exposure will be set automatically to match the aperture that was set. The flash sync speed can be set within 1/200 sec. to 1/30 sec. or to bulb. * <a> stands for Manual. 1 Set the Mode - Страница 84 из 261
a: Manual Exposure Bulb Exposures In step 2 on the preceding page, turn the <6> dial to the left to set <BULB>. A bulb exposure keeps the shutter open for as long as you hold down the shutter button. It can be used to photograph fireworks, etc. The elapsed exposure time will be displayed on the LCD - Страница 85 из 261
8: Automatic Depth-of-Field AE Objects in the foreground and background will be in focus automatically. All the AF points will function to detect the subject, and the aperture required to attain the necessary depth of field will be set automatically. * <8> stands for Auto-Depth of field. This mode - Страница 86 из 261
q Changing the Metering ModeN The metering mode measures the subject’s brightness to determine the correct exposure. Normally, evaluative metering is recommended. 1 Select [Metering mode]. Under the [2] tab, select [Metering mode], then press <0>. the metering mode. 2 SetPress the <U> key to select - Страница 87 из 261
Setting Exposure CompensationN O Setting Exposure Compensation Set exposure compensation if the exposure (without flash) does not come out as desired. This feature can be used in Creative Zone modes (except <a>). Although you can set the exposure compensation up to ±5 stops in 1/3-stop increments, - Страница 88 из 261
Setting Exposure CompensationN y Flash Exposure CompensationN Set flash exposure compensation if the flash exposure of the subject does not come out as desired. You can set the flash exposure compensation up to ±2 stops in 1/3-stop increments. 1 Display the Quick Control screen. With the shooting - Страница 89 из 261
3 Auto Exposure BracketingN This feature takes exposure compensation a step further by varying the exposure automatically with three shots (±2 stops in 1/3-stop increments) as shown below. You can then choose the best exposure. This is called AEB (Auto Exposure Bracketing). Standard exposure Darker - Страница 90 из 261
3 Auto Exposure BracketingN Canceling AEB Follow steps 1 and 2 to turn off the AEB amount display. The AEB setting will be canceled automatically if the power switch is set to <2>, flash recycling is complete, etc. Shooting Tips Using AEB with continuous shooting. If <i> continuous shooting (p.70) - Страница 91 из 261
A Customizing a Picture StyleN You can customize a Picture Style by adjusting individual parameters like [Sharpness] and [Contrast]. To see the resulting effects, take test shots. To customize [Monochrome], see page 93. 1 Select [Picture Style]. Under the [2] tab, select [Picture Style], then press - Страница 92 из 261
A Customizing a Picture StyleN Parameter Settings and Effects Sharpness Adjusts the sharpness of the image. To make it less sharp, set it toward the E end. The closer it is to E, the softer the image will look. To make it sharper, set it toward the F end. The closer it is to F, the sharper the - Страница 93 из 261
A Customizing a Picture StyleN Monochrome Adjustment For Monochrome, you can also set [Filter effect] and [Toning effect] in addition to [Sharpness] and [Contrast] explained on the preceding page. kFilter Effect With a filter effect applied to a monochrome image, you can make white clouds or green - Страница 94 из 261
A Registering a Picture StyleN You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. You can create Picture Styles whose parameter settings such as for sharpness and contrast are - Страница 95 из 261
A Registering a Picture StyleN a parameter. 5 Select Select a parameter such as [Sharpness], then press <0>. the parameter. 6 SetPress the <U> key to adjust the parameter as desired, then press <0>. For details, see “Customizing a Picture Style” on pages 91-93. Y P O Press the <M> button to - Страница 96 из 261
3 Setting the Color SpaceN The color space refers to the range of reproducible colors. With this camera, you can set the color space to sRGB or Adobe RGB for captured images. For normal shooting, sRGB is recommended. In Basic Zone modes, sRGB is set automatically. 1 Select [Color space]. Under the - Страница 97 из 261
A AE LockN Use AE lock when the area of focus is to be different from the exposure metering area or when you want to take multiple shots at the same exposure setting. Press the <A> button to lock the exposure, then recompose and take the shot. This is called AE lock. It is effective for backlit - Страница 98 из 261
A FE LockN FE lock locks the flash exposure setting over the desired area of the subject. This feature can also be used with a Canon EX-series Speedlite. * FE stands for Flash Exposure. 1 Press the <D> button to pop-up the built-in flash. Press the shutter button halfway and look in the viewfinder - Страница 99 из 261
B: Setting the White BalanceN White balance (WB) is for making the white areas look white. Normally, the <Q> (Auto) setting will obtain the correct white balance. If naturallooking colors cannot be obtained with <Q>, you can select the white balance to match the light source or set it manually by - Страница 100 из 261
B: Setting the White BalanceN [Custom White Balance]. 2 Select Under the [2] tab, select [Custom White Balance], then press <0>. X The custom white balance selection screen will appear. the white balance data. 3 Import Select the image that was captured in step 1, then press <0>. X On the dialog - Страница 101 из 261
2 White Balance CorrectionN You can correct the white balance that has been set. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter. Each color can be corrected to one of nine levels. This is for advanced - Страница 102 из 261
2 White Balance CorrectionN White Balance Auto Bracketing With just one shot, three images having a different color balance can be recorded simultaneously. Based on the color temperature of the current white balance setting, the image will be bracketed with a blue/amber bias or magenta/green bias. - Страница 103 из 261
3 Auto Lighting OptimizerN If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automatically. With JPEG images, the correction is done when the image is captured. For RAW images, it can be corrected with Digital Photo Professional (provided software). - Страница 104 из 261
3 Lens Peripheral Illumination Correction Due to the lens characteristics, the four corners of the picture might look darker. This is called lens light fall-off or drop in peripheral illumination. With JPEG images, the correction is done when the image is captured. For RAW images, it can be - Страница 105 из 261
3 Lens Peripheral Illumination Correction About the Lens Correction Data The camera already contains lens peripheral illumination correction data for approx. 25 lenses. In step 2, if you select [Enable], the peripheral light correction will be applied automatically for any lens whose correction - Страница 106 из 261
Preventing Camera ShakeN The camera’s mechanical shake caused by the reflex mirror action can blur images taken with a super telephoto lens or close-up (macro) lens. In such cases, mirror lockup is effective. Mirror lockup is enabled by selecting the [7 Custom Functions (C.Fn)] menu’s [Mirror - Страница 107 из 261
Shooting with the LCD Monitor (Live View Shooting) Y P O You can shoot while viewing the image on the camera’s LCD monitor. This is called “Live View shooting.” Live View shooting is effective for still subjects which do not move. If you handhold the camera and shoot while viewing the LCD monitor, - Страница 108 из 261
A Shooting with the LCD Monitor 1 Display the Live View image. Press the <A> button. X The Live View image will appear on the LCD monitor. The Live View image will closely reflect the brightness level of the actual image you capture. The image’s field of view is approx. 100%. the subject. 2 Focus - Страница 109 из 261
A Shooting with the LCD Monitor To Enable Live View Shooting Under [6 Live View function settings], set [Live View shoot.] to [Enable]. Battery Life with Live View Shooting [Approx. number of shots] Temperature Shooting Conditions No Flash 50% Flash Use At 23°C / 73°F 200 180 At 0°C / 32°F 170 150 - Страница 110 из 261
A Shooting with the LCD Monitor About the Information Display Each time you press the <B> button, the information display will change. AF point (Quick mode) Magnifying frame White balance Picture Style Auto Lighting Optimizer Histogram Image-recording quality AEB FEB Drive mode AF mode •d : Live - Страница 111 из 261
Shooting Function Settings Function settings particular to Live View shooting are explained here. Q Quick Control While the image is displayed on the LCD monitor, pressing the <Q> button will enable you to set the image-recording quality, drive mode, and AF mode. In Creative Zone modes, you can - Страница 112 из 261
Shooting Function Settings 3 Menu Function Settings The menu options under the [6] tab’s [Live View function settings] menu are explained below. The functions settable in this menu screen only apply during Live View shooting. These functions do not take effect during viewfinder shooting. Grid - Страница 113 из 261
Using AF to Focus Selecting the AF Mode The AF modes available are [Live mode], [u Live mode] (face detection, p.114), and [Quick mode] (p.118). If you want to achieve precise focus, set the lens focus mode switch to <MF>, magnify the image, and focus manually (p.120). Select the AF mode. Under [6 - Страница 114 из 261
Using AF to Focus the subject. 3 Focus Aim the AF point over the subject and press the shutter button halfway. X When focus is achieved, the AF point will turn green and the beeper will sound. X If focus is not achieved, the AF point will turn orange. the picture. 4 TakeCheck the focus and - Страница 115 из 261
Using AF to Focus the subject. 2 Focus Press the shutter button halfway and the camera will focus the face covered by the <p> frame. X When focus is achieved, the AF point will turn green and the beeper will sound. X If focus is not achieved, the AF point will turn orange. If a face cannot be - Страница 116 из 261
Using AF to Focus Live Mode and u (Face Detection) Live Mode Notes AF operation Focusing will take slightly longer. Even when focus has been achieved, pressing the shutter button halfway will focus again. The image brightness may change during and after the AF operation. If the light source changes - Страница 117 из 261
Using AF to Focus Shooting conditions which can make focusing difficult: Low-contrast subjects such as the blue sky and solid-color, flat surfaces. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction. Under a light source whose brightness, - Страница 118 из 261
Using AF to Focus Quick Mode: f The dedicated AF sensor is used to focus in the One-Shot AF mode (p.66), using the same AF method as with viewfinder shooting. Although you can focus the target area quickly, the Live View image will be interrupted momentarily during the AF operation. AF point 1 - Страница 119 из 261
Using AF to Focus the subject. 3 Focus Aim the AF point over the subject and press the shutter button halfway. X The Live View image will turn off, the reflex mirror will go back down, and AF will be executed. X When focus is achieved, the beeper will sound and the Live View image will reappear. X - Страница 120 из 261
Focusing Manually You can magnify the image and focus precisely manually. 1 Set the lens focus mode switch to <MF>. Turn the lens focusing ring to focus roughly. the magnifying frame. 2 Move Press the <S> key to move the Magnifying frame magnifying frame to the position where you want to focus. To - Страница 121 из 261
Notes About the Live View Image Under low or bright light conditions, the Live View image might not reflect the brightness of the captured image. If the light source within the image changes, the screen might flicker. If this happens, stop and resume the Live View shooting under the actual light - Страница 122 из 261
Notes About the Shooting Results When you shoot continuously with the Live View function for a long period, the camera’s internal temperature may increase and it can degrade image quality. Terminate Live View shooting when not shooting images. Before taking a long exposure, stop Live View shooting - Страница 123 из 261
Shooting Movies Y P O Set the Mode Dial to <k> to shoot movies. The movie recording format will be MOV. C Cards which can record movies When shooting movies, use a large-capacity SD card rated SD Speed Class 6 “ ” or higher. If you use a slow-writing card when shooting movies, the movie might not - Страница 124 из 261
k Shooting Movies Connecting the camera to a TV set is recommended to playback movies (p.167, 169). Autoexposure Shooting 1 Set the Mode Dial to <k>. X The reflex mirror will make a sound, then the image will appear on the LCD monitor. the subject. 2 Focus Before shooting a movie, autofocus or - Страница 125 из 261
k Shooting Movies One continuous movie will be recorded as one file. During movie shooting, the top, bottom, left, and right parts of the screen will have a semi-transparent mask. The area enclosed by the semitransparent mask will be the movie image that is recorded. The semitransparent mask size - Страница 126 из 261
k Shooting Movies About the Information Display Each time you press the <B> button, the information display will change. Movie shooting remaining time/ Elapsed time AF point (Quick mode) Frame rate Magnifying frame Recording movie White balance Picture Style Auto Lighting Optimizer Image-recording - Страница 127 из 261
k Shooting Movies Manual Exposure Shooting You can manually set the shutter speed, aperture, and ISO speed for movie shooting. Using manual exposure to shoot movies is for advanced users. 1 Set the Mode Dial to <k>. X The reflex mirror will make a sound, then the image will appear on the LCD - Страница 128 из 261
k Shooting Movies and shoot the movie. 6 Focus The procedure is the same as steps 2 and 3 for “Autoexposure Shooting” (p.124). C Y P O With manual exposure shooting, AE lock and exposure compensation cannot be set. Changing the shutter speed or aperture during movie shooting is not recommended - Страница 129 из 261
k Shooting Movies Shooting Still Photos While shooting a movie, you can also take a still photo by pressing the shutter button completely. Taking still photos during movie shooting The still photo will record the entire screen including the semitransparent mask. If you take a still photo during - Страница 130 из 261
Shooting Function Settings Function settings particular to movie shooting are explained here. Q Quick Control While the image is displayed on the LCD monitor, pressing the <Q> button will enable you to set the white balance, Picture Style, Auto Lighting Optimizer, image-recording quality (for still - Страница 131 из 261
Shooting Function Settings [n] Menu Movie-recording size You can select the movie’s image size [****x****] and frame rate [9] (frames recorded per second). The 9 (frame rate) displayed on the [Movie rec. size] screen switches automatically depending on the [6 Video system] setting. • Image size - Страница 132 из 261
Shooting Function Settings Total Movie Recording Time and File Size Per Minute Movie-recording Size Total Recording Time File Size 4GB Card 16GB Card 12 min. 49 min. 330 MB/min. 12 min. 49 min. 330 MB/min. 24 min. 1 hr. 39 min. 165 MB/min. 6 [1920x1080] 5 4 [1280x720] 8 7 8 [640x480] [Crop 640x480] - Страница 133 из 261
Shooting Function Settings kShutter/AE lock button You can change the function assigned to the AE lock button and to when you press the shutter button halfway. • AF/AE lock: Normal function. Press the shutter button halfway to execute AF. Press the <w> button for AE lock. • AE lock/AF: Press the - Страница 134 из 261
Shooting Function Settings [o] Menu Movie exposure Normally, set this option to [Auto]. Setting [Movie exposure] to [Manual] enables you to manually set the ISO speed, shutter speed, and aperture for movie shooting (p.127). Grid display With [Grid 1l] or [Grid 2m], you can display grid lines. Y P O - Страница 135 из 261
[2 Shooting 2] Menu The functions settable in this menu screen only apply when the Mode Dial is set to <k>. These functions do not take effect in other shooting modes. Notes on Movie Shooting Recording and Image Quality If the attached lens has an Image Stabilizer, the Image Stabilizer will operate - Страница 136 из 261
Notes on Movie Shooting About the <E> icon and camera’s internal temperature increase When you shoot movies continuously for a long period or in high temperatures, the camera’s internal temperature may increase and the <E> icon may appear on the screen. Note that if you shoot movies for a long - Страница 137 из 261
Handy Features Y P O Silencing the Beeper (p.138) Card Reminder (p.138) Setting the Image Review Time (p.138) Setting the Auto Power-off Time (p.139) Adjusting the LCD Monitor Brightness (p.139) File Numbering Methods (p.140) Auto Rotation of Vertical Images (p.142) Checking Camera Settings (p.143) - Страница 138 из 261
Handy Features 3 Silencing the Beeper You can prevent the beeper from sounding when focus is achieved or during self-timer operation. Under the [1] tab, select [Beep], then press <0>. Select [Disable], then press <0>. 3 Card Reminder This prevents shooting if there is no card in the camera. Under - Страница 139 из 261
Handy Features 3 Setting the Auto Power-off Time To save battery power, the camera turns off automatically after the set time of idle operation elapses. You can set this auto power-off time. When the camera has turned off due to auto power off, you can wake up the camera by pressing the shutter - Страница 140 из 261
Handy Features 3 File Numbering Methods The file number is like the frame number on a roll of film. The captured images are assigned a sequential file number from 0001 to 9999 and saved in one folder. You can change how the file number is assigned. The file number will appear on a computer in this - Страница 141 из 261
Handy Features [Auto reset]: Resets the file numbering to 0001 whenever the card is replaced. Each time you replace the card, the file numbering restarts from 0001. This is convenient if you want to organize images according to cards. If the replacement card contains images recorded previously, the - Страница 142 из 261
Handy Features 3 Auto Rotation of Vertical Images Vertical images are rotated automatically so they are displayed vertically on the camera’s LCD monitor and computer instead of horizontally. The setting of this feature can be changed. Under the [5] tab, select [Auto rotate], then press <0>. The - Страница 143 из 261
Handy Features B Checking Camera Settings While the menu is displayed, press the <B> button to display the camera’s major function settings. While the menu is displayed, press the <B> button to display the settings. Press the <B> button again to return to the menu. Press the shutter button halfway - Страница 144 из 261
Handy Features 3 Reverting the Camera to the Default SettingsN This is for reverting all the camera’s shooting settings and Custom Functions to the default settings. This works in the <d> and other Creative Zone modes. 1 Select [Clear settings]. Under the [7] tab, select [Clear settings], then - Страница 145 из 261
Handy Features Shooting Settings Image-recording Settings AF mode One-Shot AF AF point selection Automatic selection q (Evaluative Metering mode metering) ISO speed AUTO (Auto) Drive mode u (Single shooting) Exposure Canceled compensation/AEB Flash exposure compensation 0 (Zero) Custom Functions - Страница 146 из 261
Handy Features 3 Preventing the LCD Monitor from Turning off Automatically This prevents the display-off sensor from turning off the shooting settings display automatically when your eye nears the viewfinder eyepiece. Select [LCD auto off]. Under the [5] tab, select [LCD auto off], then press <0>. - Страница 147 из 261
3 Setting the FlashN The built-in flash and external Speedlite settings can be set with the menu. The [External flash ***] menu options for external Speedlites are applicable only to an attached EX-series Speedlite compatible with the respective functions. The setting procedure is the same as - Страница 148 из 261
3 Setting the FlashN [Built-in flash func. setting] and [External flash func. setting] Settable Functions [Built-in flash func. setting] Function Flash mode [External flash func. setting] Page k 148 E-TTL II (Fixed) k Shutter sync. FEB* 148 k – k Flash exposure compensation k E-TTL II – 88 149 - Страница 149 из 261
3 Setting the FlashN Flash exposure compensation See “y Flash Exposure Compensation” on page 88. E-TTL II For normal flash exposures, set it to [Evaluative]. If [Average] is set, the flash exposure will be averaged for the entire metered scene as with an external metering flash. Since flash - Страница 150 из 261
f Automatic Sensor Cleaning Whenever you set the power switch to <1> or <2>, the Self Cleaning Sensor Unit operates to automatically shake off the dust on the front of the sensor. Normally, you need not pay attention to this operation. However, you can execute the sensor cleaning at anytime as well - Страница 151 из 261
3 Appending Dust Delete DataN Normally, the Self Cleaning Sensor Unit will eliminate most of the dust that might be visible on captured images. However, in case visible dust still remains, you can append the Dust Delete Data to the image for erasing the dust spots later. The Dust Delete Data is - Страница 152 из 261
3 Appending Dust Delete DataN a solid-white object. 3 Photograph At a distance of 20 cm - 30 cm (0.7 ft. - 1.0 ft.), fill the viewfinder with a patternless, solid-white object and take a picture. X The picture will be taken in the aperture-priority AE mode with an aperture of f/22. Since the image - Страница 153 из 261
3 Manual Sensor CleaningN Dust which could not be removed by the automatic sensor cleaning can be removed manually with a blower, etc. The surface of the image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. Before - Страница 154 из 261
3 Manual Sensor CleaningN While cleaning the sensor, never do any of the following. If the power is cut off, the shutter will close and the shutter curtains and image sensor might get damaged. • Setting the power switch to <2>. • Opening the battery compartment cover. • Opening the card slot cover. - Страница 155 из 261
Image Playback Y P O This chapter explains features related to viewing photos and movies, going into more detail than in Chapter 2 “Basic Shooting and Image Playback” which explained the playback procedure. Here you will find explanations about how to playback and erase photos and movies with the - Страница 156 из 261
x Searching for Images Quickly H Display Multiple Images on One Screen (Index display) Search for images quickly with the index display showing four or nine images on one screen. 1 Playback the image. When you press the <x> button, the last captured image will be displayed. to the index display. 2 - Страница 157 из 261
x Searching for Images Quickly I Jump through Images (Jump display) With the single image display, you can turn the <6> dial to jump through the images. 1 Select the jump method. In the [4 Image jump w/6] menu, select the desired jump method from [1 image/10 images/100 images/ Date/Movies/Stills], - Страница 158 из 261
u/y Magnified View You can magnify a shot image by 1.5x to 10x on the LCD monitor. 1 Magnified area position Magnify the image. During image playback, press the <u> button. X The image will be magnified. If you hold down the <u> button, the image will continue to be magnified until it reaches the - Страница 159 из 261
b Rotating the Image You can rotate the displayed image to the desired orientation. 1 Select [Rotate]. Under the [3] tab, select [Rotate], then press <0>. the image. 2 Select Press the <U> key to select the image to be rotated. You can also select an image on the index display. Y P O the image. 3 - Страница 160 из 261
k Enjoying Movies Basically, there are the following three ways to playback the movies you shot. Playback on a TV set (p.167, 169) Use the provided AV cable or an HDMI Cable HTC-100 (sold separately) to connect the camera to a TV set. Then you can playback the captured movies and photos on the TV. - Страница 161 из 261
k Enjoying Movies Playback and Editing with a Personal Computer (See the PDF file instruction manual for ZoomBrowser EX/ImageBrowser) The movie files recorded in the card can be transferred to a personal computer and played or edited with ZoomBrowser EX/ImageBrowser (provided software). You can - Страница 162 из 261
k Playing Movies 1 Playback the image. Press the <x> button to display the image. a movie. 2 Select Press the <U> key to select a movie. With the single-image display, the <1s> icon displayed on the upper left indicates that it is a movie. During the index display, the perforation on the left edge - Страница 163 из 261
k Playing Movies Function Playback Description 2 Exit 7 Play Returns to the single-image display. 8 Slow motion Adjust the slow motion speed by pressing the <U> key. The slow-motion speed is indicated on the upper right. 5 First frame Displays the movie’s first frame. 3 Previous frame Each time you - Страница 164 из 261
X Editing the Movie’s First and Last Scenes You can edit out the first and last scenes of a movie in 1-sec. increments. 1 On the movie playback screen, select [X]. X The editing screen will be displayed. the part to be edited out. 2 Specify Select either [U] (Cut beginning) or [V] (Cut end), then - Страница 165 из 261
3 Slide Show (Auto Playback) You can playback the images in the card as an automatic slide show. 1 Number of images to be played Select [Slide show]. the images to be played 2 Select back. C Item Under the [3] tab, select [Slide show], then press <0>. Press the <V> key to select the top menu item, - Страница 166 из 261
3 Slide Show (Auto Playback) the play time and repeat option. 3 SetPress the <V> key to select [Set up], then press <0>. For still photos, set the [Display time] and [Repeat] options, then press the <M> button. [Display time] [Repeat] Y P O the slide show. 4 StartPress the <V> key to select - Страница 167 из 261
Viewing the Images on TV You can also view the still photos and movies on a TV set. Before connecting or disconnecting the cable between the camera and television, turn off the camera and television. * Adjust the movie’s sound volume with the TV set. * Depending on the TV set, part of the image - Страница 168 из 261
Viewing the Images on TV Do not connect any other device’s output to the camera’s <D> terminal. Doing so may cause a malfunction. Some TVs might not be able to display the captured images. In such a case, use the provided AV cable to connect to the TV. The camera’s <q/C> terminal and <D> terminal - Страница 169 из 261
Viewing the Images on TV Some TV sets require you to first enable the HDMI CEC connection. For details, see the TV set’s instruction manual. Certain TV sets, even those compatible with HDMI CEC, may not operate properly. In such a case, set the camera’s [4 Ctrl over HDMI] menu option to [Disable], - Страница 170 из 261
K Protecting Images Protecting an image prevents it from being erased accidentally. 1 Image protect icon Select [Protect images]. Under the [3] tab, select [Protect images], then press <0>. X The protect setting screen will appear. the image and protect it. 2 Select Press the <U> key to select the - Страница 171 из 261
L Erasing Images You can either select and erase images one by one or erase them in one batch. Protected images (p.170) will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased - Страница 172 из 261
L Erasing Images [Select and erase images]. 2 Select Select [Select and erase images], then press <0>. X The images will be displayed. To display the three-image display, press the <I> button. To return to the single-image display, press the <u> button. the images to be erased. 3 Select Select the - Страница 173 из 261
B Shooting Information Display When you press the <B> button during single-image playback, you can switch the shooting information display. The most detailed shooting information is shown below. Exposure compensation amount Protect Flash exposure compensation amount Aperture Folder number - File - Страница 174 из 261
B Shooting Information Display About the Histogram The brightness histogram display shows the exposure level distribution and overall brightness. The RGB histogram display is for checking the color saturation and gradation. The display can be switched with the [4 Histogram] menu. Sample Histograms - Страница 175 из 261
Printing Images Y P O Printing (p.176) You can connect the camera directly to a printer and print out the images in the card. The camera is compatible with “wPictBridge” which is the standard for direct printing. C Digital Print Order Format (DPOF) (p.185) DPOF (Digital Print Order Format) enables - Страница 176 из 261
Preparing to Print The direct printing procedure is done entirely with the camera while you look at the LCD monitor. Connecting the Camera to a Printer 1 Set the camera’s power switch to <2>. the printer. 2 SetForupdetails, see the printer’s instruction manual. Y P O the camera to a 3 Connecting - Страница 177 из 261
Preparing to Print wPictBridge the image. 6 Playback Press the <x> button. X The image will appear, and the <w> icon will appear on the upper left to indicate that the camera is connected to a printer. C Y P O Movies cannot be printed. The camera cannot be used with printers compatible only with CP - Страница 178 из 261
wPrinting The screen display and setting options will differ depending on the printer. Some settings might not be available. For details, see the printer’s instruction manual. Printer-connected icon 1 Select the image to be printed. Check that the <w> icon is displayed on the upper left of the LCD - Страница 179 из 261
wPrinting QSetting the Paper Size Select the size of the paper loaded in the printer, then press <0>. X The paper type screen will appear. YSetting the Paper Type Select the type of the paper loaded in the printer, then press <0>. When using a Canon printer and Canon paper, read the printer’s - Страница 180 из 261
wPrinting effects. 4 SetSettheasprinting necessary. If you need not set any printing effects, go to step 5. What is displayed on the screen differs depending on the printer. Select the option on the upper right (circled in the screenshot), then press <0>. Select the desired printing effect, then - Страница 181 из 261
wPrinting the date and file number 5 Set imprinting. Set as necessary. Select <I>, then press <0>. Set as desired, then press <0>. of copies. 6 SetSettheasnumber necessary. Select <R>, then press <0>. Set the number of copies, then press <0>. printing. 7 StartSelect [Print], then press <0>. C Y P O - Страница 182 из 261
wPrinting e Adjustment of Printing Effects In step 4 on page 180, select the printing effect. When the <e> icon is displayed next to <z>, press the <B> button. You can then adjust the printing effect. What can be adjusted or what is displayed will depend on the selection made in step 4. Brightness - Страница 183 из 261
wPrinting Trimming the Image Tilt correction You can crop the image and print only the trimmed portion as if the image was recomposed. Do the trimming right before printing. If you set the trimming and then set the print settings, you may have to set the trimming again. 1 On the print setting - Страница 184 из 261
wPrinting Depending on the printer, the trimmed image area might not be printed as you specified. The smaller you make the trimming frame, the grainier the picture will look on the print. While trimming the image, look at the camera’s LCD monitor. If you look at the image on a TV screen, the - Страница 185 из 261
W Digital Print Order Format (DPOF) You can set the print type, date imprinting, and file No. imprinting. The print settings will be applied to all print-ordered images. (They cannot be set individually for each image.) Setting the Printing Options 1 Select [Print order]. Under the [3] tab, select - Страница 186 из 261
W Digital Print Order Format (DPOF) Print type Date File number K L K L Standard Prints one image on one sheet. Index Multiple thumbnail images are printed on one sheet. Both Prints both the standard and index prints. On Off On Off [On] imprints the recorded date on the print. [On] imprints the - Страница 187 из 261
W Digital Print Order Format (DPOF) Print Ordering Sel.Image Select and order images one by one. To display the three-image display, press the <I> button. To return to the single-image display, press the <u> button. After completing the print order, press the <M> button to save the print order to - Страница 188 из 261
W Direct Printing with DPOF With a PictBridge printer, you can easily print images with DPOF. 1 Prepare to print. See page 176. Follow the “Connecting the Camera to a Printer” procedure up to step 5. 2 Under the [3] tab, select [Print order]. 3 Select [Print]. [Print] will be displayed only if the - Страница 189 из 261
Customizing the Camera Y P O C Cre at iv You can customize various camera features to suit your picture-taking preferences. You can do it with Custom Functions. Custom Functions can be set and used only in Creative Zone modes. e Zo ne 189 - Страница 190 из 261
3 Setting Custom FunctionsN 1 Custom Function No. Select [Custom Functions (C.Fn)]. Under the [7] tab, select [Custom Functions (C.Fn)], then press <0>. the Custom Function No. 2 Select Press the <U> key to select the Custom Function No., then press <0>. Y P O the setting as desired. 3 Change Press - Страница 191 из 261
3 Setting Custom FunctionsN Custom Functions C.Fn I: Exposure A LV shooting k 1 Exposure level increments 2 ISO expansion 3 Flash sync. speed in Av mode p.192 k k * The C.Fn I -1 setting will also be applied to movie shooting. C.Fn II: Image 4 Long exposure noise reduction 5 High ISO speed noise - Страница 192 из 261
3 Custom Function SettingsN Custom Functions are organized into four groups based on the function type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Autofocus/Drive, C.Fn IV: Operation/Others. C.Fn I: Exposure C.Fn-1 Exposure level increments 0: 1/3-stop 1: 1/2-stop Sets 1/2-stop increments for the - Страница 193 из 261
3 Custom Function SettingsN When 1 or 2 is set, high-speed sync cannot be used with an external Speedlite. C.Fn II: Image C.Fn-4 Long exposure noise reduction 0: Off 1: Auto For 1 sec. or longer exposures, noise reduction is performed automatically if noise typical of long exposures is detected. - Страница 194 из 261
3 Custom Function SettingsN C.Fn-6 Highlight tone priority 0: Disable 1: Enable Improves the highlight detail. The dynamic range is expanded from the standard 18% gray to bright highlights. The gradation between the grays and highlights becomes smoother. With setting 1, the [Disable] setting - Страница 195 из 261
3 Custom Function SettingsN C.Fn-8 Mirror lockup 0: Disable 1: Enable Prevents camera vibrations caused by the reflex mirror action which can disturb shooting with super telephoto lenses or close-up (macro) shooting. See page 106 for the mirror lockup procedure. C.Fn IV: Operation/Others C.Fn-9 - Страница 196 из 261
3 Custom Function SettingsN C.Fn-10 Assign SET button You can assign a frequently-used function to <0>. Press <0> when the camera is shooting-ready. 0: Normal (disabled) 1: Image quality Press <0> to display the image-recording quality setting screen on the LCD monitor. Press the <S> key to select - Страница 197 из 261
3 Custom Function SettingsN C.Fn-12 Add image verification data 0: Disable 1: Enable Data for verifying whether the image is original or not is appended to the image automatically. When the shooting information of an image appended with the verification data is displayed (p.173), the <L> icon will - Страница 198 из 261
3 Registering My MenuN Under the My Menu tab, you can register up to six menu options and Custom Functions whose settings you change frequently. 1 Select [My Menu settings]. Under the [9] tab, select [My Menu settings], then press <0>. [Register to My Menu]. 2 Select Select [Register to My Menu], - Страница 199 из 261
3 Setting Copyright InformationN When you set the copyright information, it will be appended to the image as Exif information. 1 Select [Copyright information]. Under the [7] tab, select [Copyright information], then press <0>. the desired option. 2 Select Press the <V> key to select either [Enter - Страница 200 из 261
3 Setting Copyright InformationN Text Entry Procedure Changing the entry area Press the <Q> button to toggle between the top and bottom entry areas. Moving the cursor Press the <U> key to move the cursor. Entering text In the bottom area, press the <S> key to select a character, then press <0> to - Страница 201 из 261
Reference Y P O This chapter provides reference information for camera features, system accessories, etc. The back of this chapter also has an index to make it easier to look up needed information. C 201 - Страница 202 из 261
When Autofocus Fails Autofocus can fail to achieve focus (the focus confirmation light <o> blinks) with certain subjects such as the following: Subjects difficult to focus Very low-contrast subjects (Example: Blue sky, solid-color walls, etc.) Subjects in very low light Extremely backlit or - Страница 203 из 261
Using a Household Power Outlet With the AC Adapter Kit ACK-E8 (sold separately), you can connect the camera to a household power outlet and not worry about the battery level. 1 Connect the power cord. Connect the power cord as shown in the illustration. After using the camera, unplug the power plug - Страница 204 из 261
Remote Control Shooting Remote Controller RC-6 (Sold separately) This remote controller enables you to take pictures wirelessly up to about 5 meters/16.4 feet from the camera. You can either shoot immediately or use a 2-sec. delay. Remote control sensor Set the self-timer to <Q> (p.71). Point the - Страница 205 из 261
Remote Control Shooting Remote Switch RS-60E3 (Sold separately) This remote switch has a 60 cm/2.0 feet cord and enables you to press the shutter button halfway or completely. It connects to the camera’s remote control terminal. Using the Eyepiece Cover Y P O If you take a picture without looking - Страница 206 из 261
External Speedlites EOS-dedicated, EX-series Speedlites Basically operates like a built-in flash for easy operation. When an EX-series Speedlite (sold separately) is attached to the camera, almost all the autoflash control is done by the camera. In other words, it is like a high-output flash - Страница 207 из 261
External Speedlites Canon Speedlites other than the EX-series With an EZ/E/EG/ML/TL-series Speedlite set in TTL or A-TTL autoflash mode, the flash can be fired at full output only. Set the camera’s shooting mode to <a> (manual exposure) or <f> (aperture-priority AE) and adjust the aperture setting - Страница 208 из 261
Using Eye-Fi Cards With a commercially-available Eye-Fi card already set up, you can automatically transfer captured images to a personal computer or upload them to an online service via a wireless LAN. The image transfer is a function of the Eye-Fi card. To set up, use the card and to troubleshoot - Страница 209 из 261
Using Eye-Fi Cards the [Access point SSID:]. 5 Check Check that an access point is displayed for [Access point SSID:]. You can also check the Eye-Fi card’s MAC address and firmware version. Press the <M> button three times to exit the menu. the picture. 6 Take X The picture is transferred and the - Страница 210 из 261
Function Availability Table according to Shooting Modes o: Set automatically k: User selectable Basic Zone Mode Dial Quality ISO speed JPEG k k k k k k k k k k k k k RAW k k k k k k k k k k k k k RAW + 73 k k k k k k k k k k k k k Auto o o k k k k*1 k k k k k k k k k k k k k k k k k k k k k k k k k - Страница 211 из 261
Function Availability Table according to Shooting Modes Basic Zone Mode Dial Movie shooting Creative Zone o k Partial k k k k k Spot k k k k k Center-weighted average k k k k k o o o o o o o Metering mode Exposure Program shift 2 k* k Exposure compensation 3 k* k k k k AEB k k k k k AE lock k k k k - Страница 212 из 261
Menu Settings 1 Shooting 1 (Red) Page Quality 73 / 83 / 74 / 84 / 76 / 86 / 1+73 / 1 72 Beep Enable / Disable 138 Release shutter without card Enable / Disable 138 Image review Off / 2 sec. / 4 sec. / 8 sec. / Hold 138 Peripheral illumination correction Enable / Disable 104 Red-eye reduction - Страница 213 из 261
Menu Settings y Shooting 3 (Red) Page Dust Delete Data Obtains data to be used to erase dust spots 151 ISO Auto Max. 400 / Max. 800 / Max. 1600 / Max. 3200 / Max. 6400 63 Protect images Erase-protect images 170 Rotate Rotate vertical images 159 Erase images Erase images 171 Print order Specify - Страница 214 из 261
Menu Settings 6 Set-up 2 (Yellow) Page LCD brightness Seven brightness levels provided 139 Date/Time Set the date (year, month, day) and time (hour, min., sec.) 29 Language Select the interface language 30 Video system NTSC / PAL 169 Auto cleaning: Enable / Disable Sensor cleaning Live View - Страница 215 из 261
Menu Settings Movie Shooting Mode Menu n Movie 1 (Red) Page Movie recording size 1920x1080 (6 / 5 / 4) / 1280x720 (8 / 7) / 640x480 (8 / 7) / Crop 640x480 (8 / 7) 131 AF mode Live mode / u Live mode / Quick mode 132 AF during k Disable / Enable 132 kShutter/AE lock button AF/AE lock / AE lock/AF / - Страница 216 из 261
System Map ST-E2 270EX Eyepiece Extender EP-EX15ll 430EX II 580EX II Macro Ring Lite MR-14EX Macro Twin Lite MT-24EX Bundled Accessories Rubber Frame Ef E-series Dioptric Adjustment Lenses Wide Strap EW-100DB lll Eyecup Ef C Y P O Angle Finder C AC Adapter Kit ACK-E8 Semi Hard Case EH19-L Battery - Страница 217 из 261
System Map Remote Controller RC-6 Remote Switch RS-60E3 EF lenses EF-S lenses External microphone HDMI Cable HTC-100 Stereo AV Cable AVC-DC400ST C Y P O EOS DIGITAL Software Instruction Solution Disk Manual TV/Video PictBridge-compatible printer Interface Cable Interface Cable IFC-200U/500U - Страница 218 из 261
Troubleshooting Guide If a problem occurs, first refer to this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, contact your dealer or nearest Canon Service Center. Power-Related Problems The battery cannot be recharged with the battery charger provided. Do not - Страница 219 из 261
Troubleshooting Guide The battery becomes exhausted quickly. Use a fully-charged battery pack (p.24). The rechargeable battery pack performance will degrade over repeated use. Purchase a new one. If you use Live View shooting or shoot movies for a prolonged period (p.107, 123), the number of - Страница 220 из 261
Troubleshooting Guide The card cannot be used. If a card error message is displayed, see page 42 or 224. The maximum burst during continuous shooting is lower. Set the [7 Custom Functions (C.Fn)] menu’s [High ISO speed noise reduction] to [Standard], [Low], or [Disable]. If it is set to [Strong], - Страница 221 из 261
Troubleshooting Guide The built-in flash does not fire. If you shoot continuously with the built-in flash at short intervals, the flash might stop operating to protect the flash unit. The camera makes a noise when it is shaken. The built-in flash’s pop-up mechanism moves slightly. This is normal. - Страница 222 из 261
Troubleshooting Guide Display & Operation Problems The LCD monitor does not display a clear image. If the LCD monitor is dirty, use a soft cloth to clean it. In low or high temperatures, the LCD monitor display may seem slow or might look black. It will return to normal at room temperature. The - Страница 223 из 261
Troubleshooting Guide The shooting date and time displayed is incorrect. The correct date and time has not been set (p.29). No image appears on the TV screen. Make sure the AV cable or HDMI cable’s plug is inserted all the way in (p.167, 169). Set the video OUT system (NTSC/PAL) to the same video - Страница 224 из 261
Error Codes Error No. If there is a problem with the camera, an error message will appear. Follow the onscreen instructions. Countermeasures No. 01 02 Error Message & Solution Communications between the camera and lens is faulty. Clean the lens contacts. Î Clean the electrical contacts on the - Страница 225 из 261
Specifications • Type Type: Recording media: Image sensor size: Compatible lenses: Lens mount: Digital, single-lens reflex, AF/AE camera with built-in flash SD memory card, SDHC memory card, SDXC memory card 22.3 x 14.9 mm Canon EF lenses (including EF-S lenses) (35mm-equivalent focal length is - Страница 226 из 261
Specifications • Viewfinder Type: Eye-level pentamirror Coverage: Vertical/Horizontal approx. 95% Magnification: Approx. 0.87x (-1 m-1 with 50mm lens at infinity) Eye point: Approx. 19 mm (From eyepiece lens center at -1 m-1) Built-in dioptric adjustment: -3.0 - +1.0 m-1 (dpt) Focusing screen: - Страница 227 из 261
Specifications • Shutter Type: Shutter speeds: Electronically-controlled, focal-plane shutter 1/4000 sec. to 1/60 sec. (Full Auto mode), X-sync at 1/200 sec. 1/4000 sec. to 30 sec., bulb (Total shutter speed range. Available range varies by shooting mode.) • Flash Built-in flash: Retractable, auto - Страница 228 из 261
Specifications • Movie Shooting Movie compression: MPEG-4 AVC/H.264 Variable (average) bit rate Audio recording format: Linear PCM Recording format: MOV Recording size and frame rate: 1920x1080 (Full HD) : 30p/25p/24p 1280x720 (HD) : 60p/50p 640x480 (SD) : 60p/50p Crop 640x480 (SD) : 60p/50p * 30p: - Страница 229 из 261
Specifications • Image Playback Image display formats: Single image, Single image + Info (Basic info, detailed info, histogram), 4-image index, 9-image index, image rotate possible Zoom magnification: Approx. 1.5x - 10x Image browsing methods: Single image, jump by 10 or 100 images, by shooting - Страница 230 из 261
Specifications • Dimensions and Weight Dimensions (W x H x D): 128.8 x 97.5 x 75.3 mm / 5.1 x 3.8 x 3.0 in. Weight: Approx. 530 g / 18.7 oz. (CIPA testing standards) Approx. 475 g / 16.8 oz. (body only) • Operation Environment Working temperature range: 0°C - 40°C / 32°F - 104°F Working humidity: - Страница 231 из 261
Specifications • EF-S18-55mm f/3.5-5.6 IS II Angle of view: Diagonal extent: 74°20’ - 27°50’ Horizontal extent: 64°30’ - 23°20’ Vertical extent: 45°30’ - 15°40’ Lens construction: 11 elements in 9 groups Minimum aperture: f/22 - 36 Closest focusing distance: 0.25 m / 0.82 ft. (From image sensor - Страница 232 из 261
Trademarks Adobe is a trademark of Adobe Systems Incorporated. Windows is a trademark or registered trademark of Microsoft Corporation in the United States and other countries. Macintosh and Mac OS are trademarks or registered trademarks of Apple Inc. in the United States and other countries. SDXC - Страница 233 из 261
Safety Warnings Follow these safeguards and use the equipment properly to prevent injury, death, and material damage. Preventing Serious Injury or Death • To prevent fire, excessive heat, chemical leakage, and explosions, follow the safeguards below: - Do not use any batteries, power sources, and - Страница 234 из 261
• If you drop the equipment and the casing breaks open to expose the internal parts, do not touch the internal parts due to the possibility of electrical shock. • Do not disassemble or modify the equipment. High-voltage internal parts can cause electrical shock. • Do not look at the sun or an - Страница 235 из 261
Digital Camera Model DS126271 Systems This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause - Страница 236 из 261
IMPORTANT SAFETY INSTRUCTIONS 1. SAVE THESE INSTRUCTIONS — This manual contains important safety and operating instructions for Battery Charger LC-E8 & LC-E8E. 2. Before using the charger, read all instructions and cautionary remarks on (1) the charger, (2) the battery pack, and (3) the product - Страница 237 из 261
Index 1280x720 ......................................131 Battery Grip .................................. 216 1920x1080 ....................................131 Beeper.......................................... 138 1st-curtain sync.............................148 Black-and-white image ............. - Страница 238 из 261
Index Copyright information....................199 File number .................................. 140 Creative Auto ..................................55 File size .......................... 72, 132, 173 Creative Zone modes .....................20 Filter effect (Monochrome) ............. 93 Custom - Страница 239 из 261
Index Function availability table..............210 Image dust prevention.................. 151 Image review time ........................ 138 G Grid display ...........................112, 134 Image verification data ................. 197 Image Zone .................................... 20 - Страница 240 из 261
Index Live View shooting........................107 Focusing...................................113 Grid display ..............................112 Possible shots ..........................109 Long exposures → Bulb Low level format........................42, 43 M M (Manual - Страница 241 из 261
Index Paper settings (printing)................178 R Partial metering...............................86 RAW ........................................ 72 - 74 Peripheral illumination correction ...104 RAW+JPEG............................. 72 - 74 PictBridge......................................175 - Страница 242 из 261
Index Shooting mode................................20 A-DEP (Automatic depth-of-field AE) .....85 M (Manual exposure) .................83 Av (Aperture-priority AE) ............80 Tv (Shutter-priority AE)...............78 P (Program AE) ..........................60 C (Creative Auto) - Страница 243 из 261
Quick Reference Guide Menu Operations - - - - - - - - - - - - - - - - - - - - Q Quick Control Screen - - - - - - - - - - - - - - Image-recording Quality - - - - - - - - - - - - - - - Picture Style - - - - - - - - - - - - - - - - - - - - - - - Nomenclature - - - - - - - - - - - - - - - - - - - - - - - Страница 244 из 261
Quick Reference Guide Menu Operations <M> button <0> button LCD monitor <S> Cross keys 1. Press the <M> button to display the menu. 2. Press the <U> key to select the tab, then press the <V> key to select the desired item. 3. Press <0> to display the setting. 4. After setting the item, press <0>. - Страница 245 из 261
Quick Reference Guide Q Quick Control Screen With the shooting settings displayed, press the <Q> button. The Quick Control screen will appear. Aperture ISO speed Shutter speed Exposure compensation/ AEB setting Shooting mode Image-recording quality C Picture Style Y P O White balance Highlight - Страница 246 из 261
Quick Reference Guide Image-recording Quality Select [1 Quality], then press <0>. Press the <U> key to select the quality, then press <0>. Image-recording quality Pixels Possible shots Y P O A Picture StyleN Press the <XA> button. Press the <U> key to select the Picture Style, then press - Страница 247 из 261
Quick Reference Guide Nomenclature Power switch Mode Dial <Z> ISO speed setting button <D> Flash button <6> Main Dial Shutter button Y P O Focus mode switch C <A> Live View shooting/ Movie shooting button <A> AE lock button <S> AF point selection button Display-off sensor <S> Cross keys Access lamp - Страница 248 из 261
Quick Reference Guide Shooting Settings Display Aperture Shutter speed ISO speed Exposure level indicator White balance Auto Lighting Optimizer Drive mode Shooting mode Picture Style Image-recording quality Quick Control AF mode icon Battery check zxcn OK NG C Viewfinder Information Possible shots - Страница 249 из 261
Quick Reference Guide Basic Zone Modes Ba All the settings necessary for shooting are set automatically. You just press the shutter button, and the camera does the rest. sic Z o n e 1 Full Auto C Creative Auto 7 Flash Off 2 Portrait 3 Landscape 4 Close-up 5 Sports 6 Night Portrait Y P O (Displayed - Страница 250 из 261
Quick Reference Guide Cre ati v Creative Zone Modes e ne Zo You can change the camera settings as desired to shoot in various ways. d: Program AE The camera automatically sets the shutter speed and aperture in the same way as the <1> mode. Set the Mode Dial to <d>. Y P O s: Shutter-priority AE - Страница 251 из 261
Quick Reference Guide E: AF ModeN Set the lens focus mode switch to <f>. Press the <ZE> button. Press the <U> key to select the AF mode, then press <0>. X(One-Shot AF): For still subjects 9(AI Focus AF): Switches the AF mode automatically Z(AI Servo AF): For moving subjects S AF PointN C Y P - Страница 252 из 261
Quick Reference Guide Z: ISO SpeedN Press the <Z> button. Turn the <6> dial or press the <U> key to select the ISO speed. When “AUTO” is selected, the ISO speed is set automatically. When you press the shutter button halfway, the ISO speed setting will be displayed. i Drive ModeN Y P O - Страница 253 из 261
Quick Reference Guide A Live View Shooting Press the <A> button to display the Live View image. Press the shutter button halfway to focus. Y P O Press the shutter button completely to take the picture. C To change the Live View settings, use the [6 Live View function settings] menu. - Страница 254 из 261
Quick Reference Guide k Shooting Movies Set the Mode Dial to <k>. Press the shutter button halfway to focus. Press the <A> button to start shooting a movie. To stop movie shooting, press <A> again. To shoot still photos, press the shutter button. Y P O Custom FunctionsN 1 Exposure level - Страница 255 из 261
Quick Reference Guide Image Playback y u y Index u Magnify Select image C Y P O S L Erase x Playback B Shooting information 255 - Страница 256 из 261
Software Start Guide EOS DIGITAL Solution Disk This disk contains various software for EOS DIGITAL. EOS Utility Software that lets you connect your computer and camera in order to download images (still images/movies) shot with the camera to the computer, set various settings of the camera, and - Страница 257 из 261
Software Start Guide Installing the Software Never connect the camera to your computer before you install the software. The software will not be installed correctly. Even if the previous version of the software is installed, install the software by following the steps below (the current software - Страница 258 из 261
Software Start Guide Software Instruction Manual Contains the Instruction Manual files for the software provided. Copying and Viewing the Instruction Manual PDFs 1 Insert the [Software INSTRUCTION MANUAL] CD into your computer. 2 Double-click the CD-ROM icon. For Windows, it is the icon displayed - Страница 259 из 261
C Y P O - Страница 260 из 261
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan U.S.A. CANON U.S.A. INC. One Canon Plaza, Lake Success, NY 11042-1198, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, - Страница 261 из 261