l
2-Up
:
Combines two original one-sided documents on to one sheet of paper. See
.
l
Collation
:
Enabling Collation creates multiple copies of multipage documents and orders them as the original document e.g. Three copies of a 10-page
document are output from page one through page 10 three times. Normal copy mode outputs three copies of page 1, three copies of page 2 etc. See
ID Copying
When you copy using this feature, the printer prints one side on the upper half of the paper and the other side on the lower half without reducing the original
size. This feature helps copy small-sized documents, such as name cards.
See the following guide to make a copy of the ID.
1.
Load the document to be copied on the scanner glass, and close the cover (
)
2.
Press
Scroll
(
<>
) to select Copy and press
Select
(
P
).
3.
Press
Scroll
(
<>
) to select Layout and press
Select
(
P
).
4.
Press
Scroll
(
<>
) to select ID
Copy and press
Select
(
P
).
5.
If necessary, customize the copy settings including the number of copies, and contrast by using the
Copy
6.
Press
Start
(
u
) to begin copying.
Your printer begins scanning the front side.
When
ID Copy Flip Card Over
is displayed on the LCD, open the scanner cover and flip the document over with the second side facing down. Close the
scanner cover.
7.
Press
Select
(
P
) again to copy the second side and output the ID Copy.
Clone Copying
Perform the following steps to use Clone copying:
See the following guide to use Clone copying:
1.
Load the document to be copied on the scanner glass, and close the cover.
2.
Press
Scroll
(
<>
) to select Copy and press
Select
(
P
).
3.
Press
Scroll
(
<>
) to select Layout and press
Select
(
P
).
4.
Press
Scroll
(
<>
) to select Clone and press
Select
(
P
).
5.
If necessary, customize the copy settings including number of copies, contrast, and image quality by using the Copy menus. See
6.
Press
Start
(
u
) to begin copying.
2-Up
See the following steps to use 2-Up copying:
1.
Load the documents in the ADF.
2.
Press
Scroll
(
<>
) to select Copy and press
Select
(
P
).
3.
Press
Scroll
(
<>
) to select Layout and press
Select
(
P
).
NOTE:
If the original document is larger than the printable area, some portions may not be printed.
NOTE:
If you press the
Cancel
(
V
)
button the printer cancels the copy job and returns to Standby mode.
NOTE:
You cannot adjust the copy size using the
Zoom
menu while making a clone copy.