![background image](/i/dell/154781/dell-c3760dn-c3760n/h/dell-c3760dn-c3760n-140.png)
PCL Fonts List
Click
Start
to print the PCL (Hewlett-Packard Printer Control Language) Fonts List.
PCL Macros List
Click
Start
to print the PCL Macro List.
PS Fonts List
Click
Start
to print the PS Fonts List.
PDF Fonts List
Click
Start
to print the PDF Fonts List.
Job History
Click
Start
to print the Job History report.
Error History
Click
Start
to print the Error History report.
Print Meter
Click
Start
to print the Print Meter report.
Color Test Page
Click
Start
to print the Color Test Page.
Stored Documents
*1
Click
Start
to print the Stored Documents list.
*1
This item is available only when RAM Disk is enabled with the optional 512MB memory module installed or the optional hard disk is
installed.
Printer Settings
The
Printer Settings
tab includes
System Settings
,
Network Settings
,
USB Settings
,
PCL Settings
,
PostScript
Settings
,
PDF Settings
,
Secure Settings
, and
USB Direct Print Defaults
pages.
System Settings
Purpose:
To configure the basic printer settings.
Values:
Power Saver Time - Sleep
Sets the time taken by the printer to enter Sleep mode after it finishes a job.
Power Saver Time - Deep Sleep
Sets the time taken by the printer to enter Deep Sleep mode after it has
entered Sleep mode.
Power Saver Time - Auto-Off Timer
*1
Sets the time taken by the printer to be turned off after it has entered Deep
Sleep mode.
mm / inch
Sets the measurement unit to be used on the LCD panel as either mm or
inches.
Control Panel Tone
Sets the volume of the tone that is emitted when the operator panel input is
correct, or disables the tone.
Invalid Key Tone
Sets the volume of the tone that is emitted when the operator panel input is
incorrect, or disables the tone.
Machine Ready Tone
Sets the volume of the tone that is emitted when the printer becomes ready,
or disables the tone.
Job Completed Tone
Sets the volume of the tone that is emitted when a print job is complete, or
disables the tone.
Fault Tone
Sets the volume of the tone that is emitted when a job ends abnormally, or
disables the tone.
Alert Tone
Sets the volume of the tone that is emitted when a problem occurs, or
disables the tone.
Out of Paper Tone
Sets the volume of the tone that is emitted when the printer runs out of
paper, or disables the tone.
Low Toner Alert Tone
Sets the volume of the tone that is emitted when the toner is low, or
disables the tone.
Auto Clear Alert Tone
Sets the volume of the tone that is emitted 5 seconds before the printer
performs auto clear, or disables the tone.
Dell™ Printer Configuration Web Tool
138