![background image](/i/dell/154781/dell-c3760dn-c3760n/h/dell-c3760dn-c3760n-178.png)
Printer Maintenance
The
Printer Maintenance
tab includes the
System Settings
,
Maintenance
,
Tray Settings
,
Panel Language
,
TCP/IP
Settings
,
Network Settings
, and
USB Direct Print Defaults
pages.
System Settings
Purpose:
To configure the power management of the printer, auto clear time, alarm tones, time-out time, date and time,
mm/inch setting, job log auto print, Print ID, setting of the additional memory, and setting of the substitute tray.
Values:
Power Saver Timer
Sleep
*1
Deep Sleep
*1
Auto-Off Timer
*2
Available Range:
1–60 minutes
Available Range:
1–60 minutes
0
Available Range:
60–1440 minutes
Sets the amount of transition time to the Sleep mode
after the printer finishes a job.
Sets the amount of transition time between the Sleep
mode and the Deep Sleep mode.
Sets the time it takes to automatically turn off the printer
after the printer has entered the Deep Sleep mode.
Auto Reset
45 seconds
1 minute
2 minutes
Sets the amount of time before the printer automatically
resets the settings on the operator panel to the defaults
when no additional settings are made.
3 minutes
4 minutes
Fault Time-out
0
Available Range: 3–300 seconds
Sets the amount of time the printer waits before canceling
a job when the job stops abnormally.
Job Time-out
0
Available Range: 5–300 seconds
Sets the amount of time the printer waits for additional
data from the computer before it cancels the job.
Date & Time
Time Zone
Sets the time zone.
Set Date
Sets the date.
Set Time
Sets the time. You can select
AM
or
PM
when
Time
Format
is set to
12 Hour
.
Date Format
Sets the date format.
Time Format
Sets the time format in
24 Hour
or
12 Hour
.
Audio Tone
Control Panel
Off
Does not emit a tone when the operator panel input is
Tone
correct.
On
Emits a tone when the operator panel input is correct.
Invalid Key Tone Off
Does not emit a tone when the operator panel input is
incorrect.
On
Emits a tone when the operator panel input is incorrect.
Machine Ready
Off
Does not emit a tone when the printer becomes ready.
Tone
On
Emits a tone when the printer becomes ready.
Job Completed
Off
Does not emit a tone when a print job is complete.
Tone
On
Emits a tone when a print job is complete.
Fault Tone
Off
Does not emit a tone when a job ends abnormally.
On
Emits a tone when a job ends abnormally.
Understanding the Tool Box Menus
176