6

Y

Y

Y

Y

BATTERY TOOL USE AND CARE

a.  Recharge only with the charger specifi ed by the 

manufacturer. A charger that is suitable for one type of 
battery pack may create a risk of fi re when used with 
another battery pack.

b.  Use power tools only with specifi cally designated battery 

packs. Use of any other battery packs may create a risk of 
injury and fi re.

c.  When battery pack is not in use, keep it away from other 

metal objects, like paper clips, coins, keys, nails, screws 
or other small metal objects, that can make a connection 
from one terminal to another. Shorting the battery terminals 
together may cause burns or a fi re.

d.  Under abusive conditions, liquid may be ejected from the 

battery; avoid contact. If contact accidentally occurs, fl ush 
with water. If liquid contacts eyes, additionally seek medical 
help. Liquid ejected from the battery may cause irritation or 
burns.

SERVICE

Have your power tool serviced by a qualifi ed repair person using 
only identical replacement parts. This will ensure that the safety 
of the tool is maintained.

SAFETY INSTRUCTIONS FOR 

CORDLESS SCREWDRIVERS

a.  Always check that the supply voltage is the same as the 

voltage indicated on the nameplate of the charger (chargers 
with a rating of 230V or 240V can also be connected to a 
220V supply).

b.  Avoid damage that can be caused by screws, nails and 

other elements in your workpiece; remove them before you 
start working.

c.  In case of electrical or mechanical malfunction, immediately 

switch off the power tool or unplug the charger from the 
power source.

d.  Dremel can assure fl awless functioning of the tool only 

when original accessories are used.

e.  This tool should not be used by people under the age of 16.
f.  Be careful not to drive into areas where electrical wires may 

be contacted.

g.  Ensure that the trigger lock is in the middle position before 

making any adjustments or changing accessories as well as 
when carrying or storing the tool.

CHARGING BATTERIES

a.  Charge battery only with the charger that is supplied with 

the tool.

b.  Do not expose the tool/charger to rain.
c.  Never charge the battery outdoors.
d.  Store tool/charger in locations where temperature will not 

exceed 40 °C or drop below 0 °C.

e.  Batteries will explode in fi re, so do not burn batteries for any 

reason.

f.  When damaged, and under extreme usage and temperature 

conditions, batteries may start to leak.

- 

 If liquid comes into contact with the skin, wash quickly 
with soap and water, then with lemon juice or vinegar.

- 

 If liquid gets into the eyes, fl ush eyes with clean water 
for a minimum of 10 minutes and immediately seek 
medical attention.

g.  Do not use the charger when the cord or plug are damaged; 

the cord or plug should be replaced immediately at a 
certifi ed Dremel Service Centre.

h.  Do not disassemble the charger or tool.

ENVIRONMENT

DISPOSAL

The tool, accessories and packaging should be sorted for 
environmentally-friendly recycling.
Do not dispose of electric tools, batteries, accessories and 
packaging together with household waste material (only for EU 
countries).
- 

In observance of European Directive 2002/96/EC on waste 
of electric and electronic equipment and its implementation 
in accordance with national law, electric tools that have 
reached the end of their life must be collected separately 
and returned to an environmentally compatible recycling 
facility.

- The   symbol will remind you of this when the need for 

disposal occurs.

BATTERY DISPOSAL

!

WARNING

DO NOT ATTEMPT TO DISASSEMBLE THE 
BATTERY OR REMOVE ANY COMPONENT 

PROJECTING FROM THE BATTERY TERMINALS. FIRE OR INJURY 
MAY RESULT. PRIOR TO DISPOSAL, PROTECT EXPOSED 
TERMINALS.

SPECIFICATIONS 

GENERAL SPECIFICATIONS 

Cordless Driver
Model number  . . . . . . . . . . . 1120
Voltage rating . . . . . . . . . . . . 7.2 V
No-load speed  . . . . . . . . . . . no 0-300/min
Bit holder . . . . . . . . . . . . . . . 1/4" Hex/shank
Maximum screw size . . . . . . 1/4" (6 mm)
Soft torque . . . . . . . . . . . . . . 5.50 Nm
Hard torque  . . . . . . . . . . . . . 8.24 Nm

Charger
Model number  . . . . . . . . . . . 866
Voltage rating . . . . . . . . . . . . 230 V
Charge time . . . . . . . . . . . . . 5 Hrs.

2610398910-Driver-0807.indb   6

2610398910-Driver-0807.indb   6

31-7-2008   12:37:10

31-7-2008   12:37:10