![background image](/i/eaton/99050/eaton-ex-2200-rt2u-netpack-68411/h/eaton-ex-2200-rt2u-netpack-68411-012.png)
34007776EN/AD - Page 10
2. Installation
2.4 Communication ports
Connection of RS232 or USB communication port
(optional)
Installation of the communication cards
(optional)
The RS232 and USB communication ports cannot operate simultaneously.
1 - Connect the RS232
(33)
or USB
(34)
communication cable to the serial or USB
port on the computer equipment.
2 - Connect the other end of the
communication cable
(33)
or
(34)
to the
USB
(1)
or RS232
(2)
communication port
on the UPS.
The
UPS
can now communicate with
EATON power management software.
Communication card slot
(restricted access)
It is not necessary to shutdown the UPS
before installing a communication card.
1 - Remove the UPS cover
(4)
secured by
screws.
2 - Insert the communication card in the
slot.
3 - Put the UPS cover back in place using
the screws.
34
2
1
33
4