102
Maintaining and Transporting Your Scanner
Replacing the Fluorescent Lamp
The luminosity of the fluorescent lamp declines over time. If the lamp breaks or
becomes too dim to operate normally, the scanner stops working and both the
READY
and
ERROR
lights flash. If this happens, the lamp assembly may need to be
replaced. Contact EPSON. (See “Where To Get Help” on page 118.)
Never open the case of the scanner. If you think repairs or adjustments
are necessary, consult EPSON.
Transporting the Scanner
If you need to transport the scanner or store it for an extended period, you must
secure the carriage beforehand. Turn on the scanner and wait until the carriage moves
to the home position (the left side). Then turn off the scanner.
Turn the transportation lock to the locked position to secure the carriage.
If the scanner is inoperable, the carriage may not automatically return to
the home position. If it doesn’t, raise the right side of the scanner and hold
it up until the carriage comes to rest at the left side. Then turn the
transportation lock to the locked position.
locked position
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
