Инструкция для FBT MITUS 121SA SUB, MITUS 112 8ohm, MITUS 212FSA, MITUS 212FS SUB, MITUS 115A, MITUS 115 8ohm, MITUS 118S 4ohm, MITUS 206LA, MITUS 118SA SUB, MITUS 210MA, MITUS 206L, MITUS 210M
![background image](/i/fbt/101472/fbt-mitus-121sa-sub-mitus-112-8ohm-mitus-212fsa-mitus-212fs-sub-mitus-115a/h/fbt-mitus-121sa-sub-mitus-112-8ohm-mitus-212fsa-mitus-212fs-sub-mitus-115a-028.png)
INVASK.RU MITUS Sound Reinforcement Speaker Series
28
частого использования.
Предустановка, которая будет выбрана, существенно зависит от системной
конфигурации, т.е. от числа из спикеров в массиве и наклону каждого из них.
Последние две предустановки – “INDOOR” (внутри помещений) – разрабатывались
для использования в закрытых помещениях внутри отражающих поверхностей
зданий.
- 1 - 2 SPKR
– 0 - 4°: Когда система составлена из одного или двух MITUS 206LA
спикеры и
угол между ними (если их два) между 0° и 4°.
- 2 SPKR
– 6 - 10°: Когда система составлена из двух MITUS 206LA speakers и угол
между ними между 6° и 10°.
- 3 - 6 SPKR
– 0 - 4°: Когда система составлена из трёх, четырех, пяти или шести
MITUS 206LA
спикеров и угол между ними между 0° и 4°.
- 3 - 6 SPKR
– 6 - 10°: Когда система составлена из трёх, четырех, пяти или шести
MITUS 206LA
, спикеров и угол между ними между 6° и 10°.
Например, если система составлена из шести спикеров в J сформированный
массив со следующими углами между спикерами, начиная сверху: 0°, 2°, 4°, 6°, 8°,
тогда первые 4 спикера формируются с предустановкой '3 - 6 SPKR – 0 - 4°', в то
время как последнее
два (с наклоном на 8° и на 6°) должны формироваться с предустановкой '3 к 6
SPKR- 6 -10
°'.
- 7+SPKR
– 0 - 4°: Когда система составлена из 7 или больше MITUS 206LA
спикеров, и угол между ними между 0° и 4°.
- 7 + SPKR
– 6 к 10°: Когда система составлена из 7 или больше MITUS 206LA
спикеров и угол между ними между 6° и 10°.
- 3 - 6 SPKR
– INDOOR: Когда система составлена из трёх, четырех, пяти или шести
MITUS 206LA
спикеры независимо от угла между ними и систему используют в
отражающих звук комнатах.
- 7 + SPKR
– INDOOR: Когда система составлена из 7 или более MITUS 206LA
спикеров независимо от угла между ними, и систему используют в отражающих
звук комнатах.
the number
of speakers in the array and the inclination of each one of them. The two last presets
-called
INDOOR- are expressly designed for usage in enclosed areas inside generally
reverberating
buildings.
-1 to 2 SPKR – 0 to 4°: When the system is composed of one or two MITUS 206LA
speakers and
the angle between them (if they are two) is between 0° and 4°.
-2 SPKR – 6 to 10°: When the system is composed of two MITUS 206LAspeakers
and the angle
between them is between 6° and 10°.
-3 to 6 SPKR – 0 to 4°: When the system is composed of three, four, five or six
MITUS 206LA
speakers and the angle between them are between 0° and 4°.
-3 to 6 SPKR – 6 to 10°: When the system is composed of three, four, five or six
MITUS 206LA speakers and the angle between them is
between 6° and 10°.
For example if the system is composed of six speakers in a J shaped array with the
following angles between the
speakers starting from the top: 0°, 2°, 4°, 6°, 8°, then
the first 4 speakers are configured with the '3 to 6 SPKR – 0 to 4°' preset, while the
last
two (with a 6° and 8° inclination) have to be configured with the '3 to 6SPKR– 6 to
10°' preset.
-7+SPKR– 0 to 4°: When the system is composed of 7 or more MITUS
206LAspeakers and the angle between them is between 0° and 4°.
-7+ SPKR – 6 to 10°: When the system is composed of 7 or more MITUS 206LA
speakers and the angle between them is between 6° and
10°.
-3 to 6 SPKR – INDOOR: When the system is composed of three, four, five or six
MITUS 206LA speakers regardless of the angle between
them, and the system is
used in reverberating rooms.
-7+ SPKR – INDOOR: When the system is composed of 7 or more MITUS 206LA
speakers regardless of the angle between them, and the
system is used in reverberating rooms.
The preset selection depends on system configuration and type of desired sound.