GA-8I915P-D Pro Motherboard
- 38 -
English
Onboard LAN Boot ROM
This function decide w hether to inv oke the boot ROM of the onboard LAN chip.
Enabled
Enable this function.
Disabled
Disable this function. (Default v alue)
Onboard Serial P ort 1
Auto
BIOS w ill automatically setup the port 1 address.
3F8/IRQ4
Enable onboard Serial port 1 and address is 3F8. (Default v alue)
2F8/IRQ3
Enable onboard Serial port 1 and address is 2F8.
3E8/IRQ4
Enable onboard Serial port 1 and address is 3E8.
2E8/IRQ3
Enable onboard Serial port 1 and address is 2E8.
Disabled
Disable onboard Serial port 1.
Onboard IrDA Port
Auto
BIOS w ill automatically setup the port 1 address.
3F8/IRQ4
Enable onboard IrDA port and address is 3F8.
2F8/IRQ3
Enable onboard IrDA port and address is 2F8. (Default v alue)
3E8/IRQ4
Enable onboard IrDA port and address is 3E8.
2E8/IRQ3
Enable onboard IrDA port and address is 2E8.
Disabled
Disable onboard IrDA port.
UART Mode Select
This item allow s y ou to determine w hich Infra Red(IR) function of Onboard I/O chip.
ASKIR
Set onboard I/O chip UART to ASKIR Mode.
IrDA
Set onboard I/O chip UART to IrDA Mode. (Default v alue)
UR2 Duplex Mode
This feature allow s you to seclect IR mode.
This function w ill av ailable w hen "UART Mode Select" doesn't set at Normal.
Half
IR Function Duplex Half. (Default v alue)
Full
IR Function Duplex Full.
Onboard Parallel port
Disabled
Disable onboard LPT port.
378/IRQ7
Enable onboard LPT port and address is 378/IRQ7. (Default v alue)
278/IRQ5
Enable onboard LPT port and address is 278/IRQ5.
3BC/IRQ7
Enable onboard LPT port and address is 3BC/IRQ7.
Parallel Port Mode
SPP
Using Parallel port as Standard Parallel Port. (Default v alue)
EPP
Using Parallel port as Enhanced Parallel Port.
ECP
Using Parallel port as Extended Capabilities Port.
ECP+EPP
Using Parallel port as ECP & EPP mode.
ECP Mode Use DMA
3
Set ECP Mode Use DMA to 3. (Default v alue)
1
Set ECP Mode Use DMA to 1.