Инструкция для GMC ACADIA DENALI (2014)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Black plate (45,1)

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/

Mexico-6014315) - 2014 - CRC - 4/12/13

Seats and Restraints

3-45

Depending on where you place the
child restraint and the size of the
child restraint, you may not be able
to access adjacent safety belt
assemblies or LATCH anchors for
additional passengers or child
restraints. Adjacent seating
positions should not be used if the
child restraint prevents access to or
interferes with the routing of the
safety belt.

Wherever a child restraint is
installed, be sure to secure the child
restraint properly.

Keep in mind that an unsecured
child restraint can move around in a
collision or sudden stop and injure
people in the vehicle. Be sure to
properly secure any child restraint in
the vehicle

—

even when no child is

in it.

Lower Anchors and
Tethers for Children
(LATCH System)

The LATCH system secures a child
restraint during driving or in a crash.
LATCH attachments on the child
restraint are used to attach the child
restraint to the anchors in the
vehicle. The LATCH system is
designed to make installation of a
child restraint easier.

In order to use the LATCH system
in your vehicle, you need a child
restraint that has LATCH
attachments. LATCH-compatible
rear-facing and forward-facing child
seats can be properly installed
using either the LATCH anchors or
the vehicle

’

s safety belts. Do not

use both the safety belts and the
LATCH anchorage system to secure
a rear-facing or forward-facing
child seat.

Booster seats use the vehicle

’

safety belts to secure the child in
the booster seat. If the manufacturer

recommends that the booster seat
be secured with the LATCH system,
this can be done as long as the
booster seat can be positioned
properly and there is no interference
with the proper positioning of the
lap-shoulder belt on the child.

Make sure to follow the instructions
that came with the child restraint,
and also the instructions in this
manual.

When installing a child restraint with
a top tether, you must also use
either the lower anchors or the
safety belts to properly secure the
child restraint. A child restraint must
never be installed using only the top
tether and anchor.

The LATCH anchorage system can
be used until the combined weight
of the child plus the child restraint
is 29.5 kg (65 lbs). Use the safety
belt alone instead of the LATCH
anchorage system once the
combined weight is more than
29.5 kg (65 lbs).