Инструкция для GMC ALL-NEW YUKON DENALI XL (2015)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Black plate (73,1)

GMC Yukon Denali/Yukon XL Denali Owner Manual (GMNA-Localizing-U.S./

Canada/Mexico-7063681) - 2015 - CRC - 6/6/14

Driving and Operating

9-73

Driving Characteristics
and Towing Tips

Driving with a Trailer

When towing a trailer:

Become familiar with the state
and local laws that apply to
trailer towing.

Do not tow a trailer during the
first 800 km (500 mi) to prevent
damage to the engine, axle,
or other parts.

Then during the first 800 km
(500 mi) of trailer towing, do not
drive over 80 km/h (50 mph) and
do not make starts at full throttle.

Vehicles can tow in D (Drive).
Shift the transmission to a lower
gear if the transmission shifts
too often under heavy loads and/
or hilly conditions.

Do not use Adaptive Cruise
Control when towing.

Turn off Park Assist when
towing.

The Automatic Collision
Preparation System should be
set to Off when towing. See

Active Emergency Braking
System on page 9-62

{

Warning

When towing a trailer, exhaust
gases may collect at the rear of
the vehicle and enter if the
liftgate, trunk/hatch, or rear-most
window is open.

When towing a trailer:

Do not drive with the liftgate,
trunk/hatch, or rear-most
window open.

Fully open the air outlets on
or under the instrument
panel.

Also adjust the climate
control system to a setting
that brings in only outside air.
See

“

Climate Control

Systems

”

in the Index.

(Continued)

Warning (Continued)

For more information about
Carbon Monoxide, see

Engine

Exhaust on page 9-28

Towing a trailer requires a certain
amount of experience. The
combination you are driving is
longer and not as responsive as the
vehicle itself. Get acquainted with
the handling and braking of the rig
before setting out for the open road.

Before starting, check all trailer hitch
parts and attachments, safety
chains, electrical connectors, lamps,
tires, and mirrors. If the trailer has
electric brakes, start the
combination moving and then apply
the trailer brake controller by hand
to be sure the brakes work.

During the trip, check occasionally
to be sure that the load is secure
and the lamps and any trailer
brakes still work.