![background image](/i/gmc/156474/gmc-sierra-1500-denali-2014/h/gmc-sierra-1500-denali-2014-172.png)
Black plate (34,1)
GMC Sierra Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
5853626) - 2014 - 3rd crc - 6/6/14
5-34
Instruments and Controls
is low, the value for that tire is
shown in amber. See
and
Tire Pressure Monitor Operation on
page 10-63
Fuel Economy:
The center
displays the instantaneous fuel
economy as a number and bar
graph. Displayed above the bar
graph is a running average of fuel
economy for the most recently
traveled selected distance.
Displayed below the bar graph is
the best average fuel economy that
has been achieved for the selected
distance. The selected distance is
displayed at the top of the page as
“
last xxx mi/km.
”
Next to the
odometer, the Active Fuel
Management displays the number of
cylinders the vehicle is running on.
See
.
Press
p
to select the distance or
reset best value. Use
w
and
x
to
choose the distance and press
V
.
Press
w
and
x
to select
“
Reset
Best Score.
”
Press
V
to reset the
best average fuel economy. After
reset, the best value displays
“
-,-
”
until the selected distance has been
traveled.
The display provides information on
how current driving behavior affects
the running average and how well
recent driving compares to the best
that has been achieved for the
selected distance.
Timer:
This display can be used as
a timer. To start the timer, press
V
while this display is active. The
display will show the amount of time
that has passed since the timer was
last reset. To stop the timer, press
V
briefly while this display is active
and the timer is running. To reset
the timer to zero, press and hold
V
while this display is active, or press
p
and select reset.
Speed Limit (If Equipped):
Shows
sign information, which comes from
a roadway database in the onboard
navigation.
Engine Hours:
Shows the total
number of hours the engine has run.
Transmission Fluid
Temperature:
Shows the
temperature of the automatic
transmission fluid in either degrees
Celsius (°C) or degrees
Fahrenheit (°F).
Trailer Brake (If Equipped):
On
vehicles with the Integrated Trailer
Brake Control (ITBC) system, the
trailer brake display appears in
the DIC.
TRAILER GAIN shows the trailer
gain setting. This setting can be
adjusted from 0.0 to 10.0 with either
a trailer connected or disconnected.
OUTPUT shows the power output to
the trailer any time a trailer with
electric brakes is connected. Output
is displayed as a bar graph. Dashes
may appear in the OUTPUT display
if a trailer is not connected.
Blank Page:
Shows no
information.