Инструкция для GMC SIERRA 2500HD Denali (2015)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Black plate (80,1)

GMC Sierra Denali Owner Manual (GMNA Localizing-U.S/Canada/Mexico-

7299750) - 2015 - crc - 6/9/14

10-80

Vehicle Care

{

Warning

Never use oil or grease on bolts
or nuts because the nuts might
come loose. The vehicle's wheel
could fall off, causing a crash.

10. Put the wheel nuts back on

with the rounded end of the
nuts toward the wheel.

11. Tighten each wheel nut by

hand. Then use the wheel
wrench to tighten the nuts until
the wheel is held against
the hub.

12. Turn the wheel wrench

counterclockwise to lower the
vehicle. Lower the jack
completely.

{

Warning

If wheel studs are damaged, they
can break. If all the studs on a
wheel broke, the wheel could

(Continued)

Warning (Continued)

come off and cause a crash.
If any stud is damaged because
of a loose-running wheel, it could
be that all of the studs are
damaged. To be sure, replace all
studs on the wheel. If the stud
holes in a wheel have become
larger, the wheel could collapse in
operation. Replace any wheel if
its stud holes have become larger
or distorted in any way. Inspect
hubs and hub

‐

piloted wheels for

damage. Because of loose
running wheels, piloting pad
damage may occur and require
replacement of the entire hub, for
proper centering of the wheels.
When replacing studs, hubs,
wheel nuts or wheels, be sure to
use GM original equipment parts.

{

Warning

Wheel nuts that are improperly or
incorrectly tightened can cause
the wheels to become loose or
come off. The wheel nuts should
be tightened with a torque wrench
to the proper torque specification
after replacing. Follow the torque
specification supplied by the
aftermarket manufacturer when
using accessory locking wheel
nuts. See

Capacities and

Specifications on page 12-2

for

original equipment wheel nut
torque specifications.

{

Caution

Improperly tightened wheel nuts
can lead to brake pulsation and
rotor damage. To avoid expensive
brake repairs, evenly tighten the
wheel nuts in the proper

(Continued)