Инструкция для GMC TERRAIN (2014)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Black plate (40,1)

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/

Mexico-6081485) - 2014 - CRC - 12/6/13

9-40

Driving and Operating

Other Messages

There are messages that may
appear on the Driver Information
Center (DIC) in the instrument
cluster to provide information about
FCA. See

Object Detection System

Messages on page 5-27

Cleaning the System

If the FCA system does not seem to
operate properly, clean the outside
of the windshield area in front of the
camera sensor before considering
taking the vehicle in for service.

Ultrasonic Parking Assist

For vehicles with the Ultrasonic
Rear Parking Assist (URPA) system,
it assists the driver with parking and
avoiding objects while in
R (Reverse). URPA operates at
speeds less than 8 km/h (5 mph),
and the sensors on the rear bumper
detect objects up to 2.5 m (8 ft)
behind the vehicle, and at least
20 cm (8 in) off the ground. The

distance objects can be detected
may be less during warmer or humid
weather.

{

Warning

The URPA system does not
detect children, pedestrians,
bicyclists, animals, or objects
below the bumper or that are too
close or too far from the vehicle.
It is not available at speeds
greater than 8 km/h (5 mph). To
prevent injury, death, or vehicle
damage, even with URPA, always
check the area around the vehicle
and check all mirrors before
backing.

How the System Works

URPA comes on automatically when
the shift lever is moved into
R (Reverse). A single beep sounds
to indicate the system is working.

URPA operates only at speeds less
than 8 km/h (5 mph).

A detected obstacle is indicated by
audible beeps. The interval between
the beeps becomes shorter as the
vehicle gets closer to the obstacle.
When the distance is less than
30 cm (12 in) the beeping is
continuous for five seconds.

Turning the System On and Off

The URPA system can be turned on
and off using the infotainment
system controls. See

Vehicle

Personalization on page 5-31

for

more information.

The On with Tow Bar Attached
setting allows for the parking assist
to work properly with a small item
attached to the trailer hitch.

When the system is off, PARK
ASSIST OFF displays on the Driver
Information Center (DIC). The
message disappears after a short
period of time.

URPA defaults to the on setting
each time the vehicle is started.

Turn URPA off when towing a trailer.