Инструкция для GMC TERRAIN (2014)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Black plate (10,1)

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/

Mexico-6081485) - 2014 - CRC - 12/6/13

10-10

Vehicle Care

{

Caution

Do not add too much oil. Oil
levels above or below the
acceptable operating range
shown on the dipstick are harmful
to the engine. If you find that you
have an oil level above the
operating range, i.e., the engine
has so much oil that the oil level
gets above the cross-hatched
area that shows the proper
operating range, the engine could
be damaged. You should drain
out the excess oil or limit driving
of the vehicle and seek a service
professional to remove the
excess amount of oil.

See

Engine Compartment Overview

on page 10-5

for the location of the

engine oil fill cap.

Add enough oil to put the level
somewhere in the proper operating
range. Push the dipstick all the way
back in when through.

Selecting the Right Engine Oil

Selecting the right engine oil
depends on both the proper oil
specification and viscosity grade.
See

Recommended Fluids and

Lubricants on page 11-12

Specification

Use and ask for licensed engine oils
with the dexos1

approved

certification mark. Engine oils
meeting the requirements for the
vehicle should have the dexos1
approved certification mark. This
certification mark indicates that the
oil has been approved to the dexos1
specification.

{

Caution

Failure to use the recommended
engine oil can result in engine
damage not covered by the
vehicle warranty. Check with your
dealer or service provider on
whether the oil is approved to the
dexos1 specification.

Viscosity Grade

SAE 5W-30 is the best viscosity
grade for the vehicle. Do not use
other viscosity grade oils such as
SAE 10W-30, 10W-40, or 20W-50.

Cold Temperature Operation: In an
area of extreme cold, where the
temperature falls below

−

29°C

(

−

20°F), an SAE 0W-30 oil may be

used. An oil of this viscosity grade
will provide easier cold starting for
the engine at extremely low
temperatures. When selecting an oil
of the appropriate viscosity grade,
always select an oil of the correct