Инструкция для GMC TERRAIN (2014)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Black plate (4,1)

GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-U.S./Canada/

Mexico-6081485) - 2014 - CRC - 12/6/13

2-4

Keys, Doors, and Windows

(Vehicle Locator/Panic

Alarm):

Press and release one

time to initiate vehicle locator. The
exterior lamps flash and the horn
chirps three times. Press and hold

for at least three seconds to

sound the panic alarm. The horn
sounds and the turn signals flash
until

is pressed again or the key

is placed in the ignition and turned
to ON/RUN.

(Remote Vehicle Start):

If equipped, first press and release

then immediately press and

hold

for at least four seconds to

start the engine from outside the
vehicle using the RKE transmitter.
See

Remote Vehicle Start on

page 2-5

The buttons on the keys are
disabled when there is a key in the
ignition.

Programming Transmitters to
the Vehicle

Only RKE transmitters programmed
to this vehicle will work. If a
transmitter is lost or stolen, a
replacement can be purchased and
programmed through your dealer.
When the replacement transmitter is
programmed to this vehicle, all
remaining transmitters must also be
reprogrammed. Any lost or stolen
transmitters will no longer work
once the new transmitter is
programmed. See your dealer to
have new transmitters programmed.

Programming with a Recognized
Transmitter

To program a new key:

1. Insert the original, already

programmed key in the ignition
and turn to the key to the ON/
RUN position.

2. Turn the key to LOCK/OFF, and

remove the key.

3. Insert the new key to be

programmed and turn it to the
ON/RUN position within
five seconds.

The security light will turn off
once the key has been
programmed.

4. Repeat Steps 1

–

3 if additional