Инструкция для GMC YUKON XL DENALI (2014)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Black plate (31,1)

GMC Yukon/Yukon XL Owner Manual (GMNA-Localizing-U.S./Canada-

6081505) - 2014 - crc - 4/23/13

Instruments and Controls

5-31

Compass Recalibration

This display allows for calibrating
the compass. See

Compass on

page 5-5

Blank Display

This display shows no information.

Trip Odometer Reset Stem
Menu Items (With DIC Buttons)

Use the trip odometer reset stem to
view the odometer and trip
odometer. The Language selection
and Engine Hours display can also
be accessed with the trip odometer
reset stem.

Odometer

Press the trip odometer reset stem
until ODOMETER displays. This
display shows the distance the
vehicle has been driven in either
kilometers (km) or miles (mi).

Trip Odometer

Press the trip odometer reset stem
until TRIP displays. This display
shows the current distance traveled

in either kilometers (km) or
miles (mi) since the last reset for the
trip odometer.

The trip odometer can be reset to
zero by pressing and holding the trip
odometer reset stem while the trip
odometer is displayed.

The trip odometer has a feature
called the retroactive reset. This can
be used to set the trip odometer to
the number of kilometers (miles)
driven since the ignition was last
turned on. This can be used if the
trip odometer is not reset at the
beginning of the trip.

To use the retroactive reset feature,
press and hold the trip odometer
reset stem for at least four seconds.
The trip odometer will display the
number of kilometers (km) or
miles (mi) driven since the ignition
was last turned on and the vehicle
was moving. Once the vehicle
begins moving, the trip odometer
will accumulate mileage. For
example, if the vehicle was driven
8 km (5 mi) before it is started again,

and then the retroactive reset
feature is activated, the display will
show 8 km (5 mi). As the vehicle
begins moving, the display will then
increase to 8.2 km (5.1 mi), 8.4 km
(5.2 mi), etc.

Language

This display allows you to select the
language in which the DIC
messages will appear. To select a
language:

1. Press the trip odometer reset

stem until ODOMETER displays.

2. While in the ODOMETER

display, press and hold the trip
odometer reset stem for
three seconds until the currently
set language displays.

3. Continue to press and hold the

trip odometer reset stem to scroll
through all of the available
languages.

The available selections are
ENGLISH (default), FRANCAIS
(French), ESPANOL (Spanish),
and NO CHANGE.