Инструкция для GMC YUKON XL DENALI (2014)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Black plate (54,1)

GMC Yukon/Yukon XL Owner Manual (GMNA-Localizing-U.S./Canada-

6081505) - 2014 - crc - 4/23/13

5-54

Instruments and Controls

To program up to three devices:

1. To verify that the garage door

opener is a Fixed Code unit,
remove the battery cover on the
hand-held transmitter supplied
by the manufacturer of the
garage door opener motor.
If there is a row of dip switches
similar to the graphic above, the
garage door opener is a Fixed
Code unit. If you do not see a
row of dip switches, return to the
previous section for
Programming Universal Home
Remote

—

Rolling Code.

Your hand-held transmitter can
have between 8 to 12 dip
switches depending on the
brand of transmitter.

The garage door opener receiver
(motor head unit) could also
have a row of dip switches that
can be used when programming
the Universal Home Remote.
If the total number of switches
on the motor head and
hand-held transmitter are
different, or if the dip switch
settings are different, use the dip
switch settings on the motor
head unit to program the
Universal Home Remote. The
motor head dip switch settings
can also be used when the
original hand-held transmitter is
not available.

Example of Eight Dip Switches

with Two Positions

Example of Eight Dip Switches

with Three Positions

The panel of switches might not
appear exactly as they do in the
examples above, but they
should be similar.

The switch positions on the
hand-held transmitter could be
labeled as follows:

A switch in the up position
could be labeled as Up,
+, or On.