33
2. Press the cursor button to set "FTA Only", then highlight "Search", press the "OK" button
to start auto scan .
Channel Scan
1. Select "Channel Scan", press the "OK" button to
enter the Channel Scan menu.
2. Press cursor button to set Scan mode, Scan Band ,
Channel No., Frequency and Bandwidth, then highlight
"Search", press "OK" button to start channel scan.
Aerial Adjustment
1. Select the "Aerial Adjustment", press "OK" to enter
the Aerial Adjustment.
2. Press the cursor button to set the desired setting.
When "Tuner Power" is selected "On", the STB will
provide 5V power to antenna. It will not provide when
selected "Off".
LCN
If LCN(Logical Channel Number) Select function is activated, you can't change the original
number of TV channels by scanning. You can activate/deactivate the LCN function by setting
the "LCN Mode" to on/off.