9
How to Use
Before first use, wash the Jar Assembly in warm
sudsy water, rinse and dry well.Blending is a very
fast process.The motor drives the cutter at high
speed to ensure that through blending is
achieved.Make sure that whenever you use blender
it is standing on a flat, clean, dry surface.Before
starting to blend check that the jar assembly is
firmly in place on the motor base.
Operation
With the motor unit resting on a flat dry surface and
jar assembly firmly sitting in place, put the foods to
be blended into the jar.
Please note that the jar should be locked on to
the main unit by holding the washable blade
assembly not the jar handle.
Use the measuring scale on the jar as a guide
and, to avoid having the food overflow, restrict the
quantity to no more than 1500 ml. at any one
time.Place lid and lid insert on jar assembly.
ATTENTION: Do not operate the appliance
continiously more than 60 seconds.
Do not operate the appliance when empty.
Ensure the blender is switched OFF "O" and plug
power cord into a power outlet.Turn blender
switch to either setting for a few seconds.Switch
OFF "O" and check the food.Blending is a fast
process.Take care not to over blend.
Use the PULSE "ooo" setting for greater control
in short blending jobs.Switch must be held in
PULSE position for blender to run.Blender will
stop as soon as switch is released.Use the
PULSE "ooo" switch to prevent over blending of
foods.
If you wish to add ingredients whilst blending,
liquids can be added through the hole in the lid
insert, or the lid insert can be removed to allow
dry foods to be added through the larger hole.DO
NOT operate the blender without the lid and lid
insert in place.
Cleaning
Wash the blender jar and its associated parts in
warm sudsy water after each use.Dry all parts
throughly before storing.These parts are not
dishwasher safe.
Powdered cleaners and abrasive pads will damage
the surface of the parts.Remove stubborn soil by
soaking and wiping with soft cloths and mild liquid
cleaners.
NOTE: NEVER IMMERSE THE BASE ASSEMBLY
IN ANY LIQUID.
To clean the base, wipe clean with a damp
cloth.Allow to dry thoroughly before re-using or
storing.
Wet Grinding:
Grinds wet ingredients 1 cup at a
time to make a paste or batter.
Dry Grinding:
Grinds dry ingredients such as nuts
or peppercorns of Coffee beans 1 cup at a time
without liquid.
To prolong the life of blender always:
1. Use it on a flat dry surface.
2. Have the lid in place when blending.
3. Switch OFF "O" before you scrape food down the
inside of the jar with a long handled spatula.
4. Make sure there is something in the jar each time
you switch "ON".The cutter bearing may be
damaged if run on "No-load".
5. Cut cooked meats into one centimeter squares
before adding into the jar.
6. Remember that a blender cannot process raw
meet.
7. Ensure that the food being blended is not too
thick or heavy for the motor to handle.If it seems
to be having diffucultly, either add a little liquid
through the lid or switch OFF "O", remove the lid
and scrape the mixture down towards the blade
with a soft rubber spatula.
8. Please DO NOT use the jar for storing foods or
beverages.
Environment
Do not throw away the appliance with the normal
household waste at the end of its life, but hand it in
at an official collection point for recycling. By doing
this, you help to preserve the environment.
Guarantee & service
If you need information or if you have a problem,
please contact the Gorenje Customer Care Centre
in your country (you find its phone number in the
worldwide guarantee leaflet). If there is no
Customer Care Centre in your country, go to your
local Gorenje dealer or contact the Service
department of Gorenje domestic appliances.
For personal use only!
GORENJE
WISHES YOU A LOT OF PLEASURE
WHEN USING YOUR APPLIANCE
We reserve the right to any modifications!
