![background image](/i/gorenje/151401/gorenje-r706e/h/gorenje-r706e-010.png)
9
GB
METAL FOOD SLICER
This appliance is designed only for domestic use
and it is not intended for industrial use.
Use the appliance for processing the usual
household quantities of food.
Please keep the instruction manual in a safe place
and if the appliance changes hands, pass them on to
a new owner.
Outline
Please open and read the pages with illustrations.
Figures:
1. ON button.
2. Motor unit.
3. Rotary knob and stop plate. Sets the slicing
thickness (0 to 15 mm).
4. Rest holder. For safe slicing of rest pieces.
5. Carriage. Guides the food to be sliced towards
the blade.
6. Base. Supports the carriage.
7. Blade.
8. Safety switch. Before switching on the appliance,
press the safety lock. The safety switch prevents
the appliance from being accidentally switched
on.
Safety instructions
A Risk of injury
The appliance may be connected and operated only
in accordance with the specifications on the rating
plate. Do NOT use the damaged appliance or the
damaged power lead.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety. Children should
be supervised to ensure that they do not play with the
appliance.
After using the appliance, if it is left unattended or if
the appliance is faulty, ALWAYS disconnect the
power lead from the mains socket. Do NOT pull the
power lead over sharp edges. To prevent injury, any
repairs such as replacing a damaged power lead,
should only be carried out by customer service.
Worn-out appliances must be made unsuitable for
further use.
Never connect this appliance to an external timer
switch or remote control system in order to avoid a
hazardous situation.
The wall socket must be accessible and must be
earthed according to technical specification.
Noise level: Lc < 75 dB(A)
This appliance is marked according to the
European directive 2002/96/EC on Waste
Electrical and Electronic Equipment
(WEEE). This guideline is the frame of a
European-wide validity of return and
recycling on Waste Electrical and
Electronic Equipment.
Operating the appliance
Before using the appliance for the first time, clean it
thoroughly.
Preparation
Place the appliance on a flat, clean surface.
Insert the power lead plug into the mains socket.
Attach the carriage and rest end holder to the
appliance housing.
Set the desired slicing thickness (0 to 15 mm).
Low adjustment range provides narrow slicing (e.
g. for salami, ham).
Switching the appliance
ON/OFF
Risk of injury by the sharp blade
When the appliance is switched OFF, the blade
continues rotating for some time. Do not touch it with
your hands!
WARNING!
The motor may overheat
After a maximum of 5 minutes of continuous use,
switch OFF the appliance and allow it to cool down.
Slicing
Gently press the food to be sliced against the
stop plate and slowly slide it against the moving
blade.
Do not operate the appliance without the carriage
and rest holder unless absolutely necessary due to
the shape and size of the food.
After using the appliance
Set the slicing thickness to 0.
After slicing greasy food (e.g. meat, sausages,
cheese):
The appliance and especially the blade should be
cleaned immediately; (see section "Cleaning").