6
English
SPECIFICATIONS
Model
D10VF
D10VG
D13VF
D13VG
Voltage (by areas)*
(110V, 220V, 230V, 240V)
Power input
710W*
No load speed
0–3,000min
–1
0–1,200min
–1
0–850min
–1
0–600min
–1
Drill chuck capacity
10 mm
13 mm
Steel
Twist Bit
10 mm
10 mm
13 mm
13 mm
Hole Saw
–
38 mm
51 mm
70 mm
Capacity
Flat Spade Bit
25 mm
32 mm
40 mm
40 mm
Wood
Auger Bit
–
–
32 mm
38 mm
Hole Saw
29 mm
70 mm
102 mm
114 mm
Weight (without cord)
Spec. for keyed chuck
1.8 kg
1.9 kg
2.1 kg
2.1 kg
Spec. for keyless chuck
1.8 kg
1.9 kg
2.0 kg
2.0 kg
*Be sure to check the nameplate on product as it is subject to change by areas.
〈
Capacity with Angle attachment (Optional accessory for D13VF and D13VG)
〉
Model
D13VF
D13VG
Speed of angle unit
LOW(650min
–1
) HIGH(1350min
–1
) LOW(400min
–1
) HIGH(900min
–1
)
Steel
Twist Bit
13 mm
13 mm
13 mm
13 mm
Hole Saw
64 mm
32 mm
70 mm
51 mm
Capacity
Flat Spade Bit
40 mm
32 mm
40 mm
40 mm
Wood
Auger Bit
38 mm
29 mm
38 mm
32 mm
Hole Saw
114 mm
64 mm
114 mm
102 mm
STANDARD ACCESSORIES
〈
D10VF
〉
(1) Chuck wrench (Spec. only for keyed chuck) ...... 1
〈
D10VG and D13VF
〉
(1) Side handle ................................................................ 1
(2)Chuck wrench (Spec. only for keyed chuck) ........ 1
〈
D13VG
〉
(1) Side handle ................................................................ 1
(2) Handle joint ................................................................ 1
(3) Chuck wrench (Spec. only for keyed chuck) ...... 1
Standard accessories are subject to change without notice.
OPTIONAL ACCESSORIES (sold separately)
〈
D10VF
〉
(1) Side handle
(2) Hook (A)
〈
D10VG
〉
(1) Hook (A)
〈
D13VF and D13VG
〉
(1) Hook (A)
(2) Angle attachment
Optional accessories are subject to change without notice.
APPLICATIONS
䡬
Boring holes in metal, wood and plastic.
PRIOR TO OPERATION
1. Power source
Ensure that the power source to be utilized conforms
to the power requirements specified on the product
nameplate.
2. Power switch
Ensure that the power switch is in the OFF position.
If the plug is connected to a receptacle while the
power switch is in the ON position, the power tool
will start operating immediately, inviting serious
accident.
3. Extension cord
When the work area is removed from the power
source. Use an extension cord of sufficient thickness
and rated capacity. The extension cord should be
kept as short as practicable.
4. Selecting the appropriate drill bit:
䡬
When boring metal or plastic
Use ordinary metalworking drill bits.
DRILL SAFETY WARNINGS
1.
Wear ear protectors with impact drills.
Exposure to noise can cause hearing loss.
2.
Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
3. Hold the drill and side handle securely with both
hands when using.
4. Do not wear gloves made of stuff liable to roll up
such as cotton, wool, cloth or string, etc.
5. Prior to drilling into walls, ceilings or floors, ensure
there are no electric cables or conduits inside.
01Eng_D10VF_EE
3/3/09, 19:34
6
