![background image](/i/honda/160145/honda-cg125-1976-1991/h/honda-cg125-1976-1991-087.png)
Tyre changing sequence - tubed tyres
Deflate tyre. After pushing tyre
beads away from rim flanges
push tyre bead into well of rim
at point opposite valve. Insert
tyre lever adjacent to valve
and work bead over edge of
rim.
Use two levers to work bead
over edge of rim. Note use of
rim protectors
Remove inner tube from tyre
When first bead is clear,
remove tyre as shown
When fitting, partially inflate
inner tube and insert in tyre
Work first bead over rim and
feed valve through hole in rim.
Partially screw on retaining
nut to hold valve in place.
Check that inner tube is
positioned correctly and work
second bead over rim using
tyre levers. Start at a point
opposite valve.
Work final area of bead over
rim whilst pushing valve
inwards to ensure that inner
tube is not trapped