HP BL460c Gen9 Intel® Xeon® E5-2603v3 (1.6GHz/6-core/15MB/85W) FIO
Processor Kit

726999-L21

HP BL460c Gen9 Intel® Xeon® E5-2650Lv3 (1.8GHz/12-core/30MB/65W) FIO
Processor Kit

727000-L21

HP BL460c Gen9 Intel® Xeon® E5-2698v3 (2.3GHz/16-core/40MB/135W) FIO
Processor Kit

727001-L21

HP BL460c Gen9 Intel® Xeon® E5-2630Lv3 (1.8GHz/8-core/20MB/55W) FIO
Processor Kit

727002-L21

HP BL460c Gen9 Intel® Xeon® E5-2695v3 (2.3GHz/14-core/35MB/120W) FIO
Processor Kit

727003-L21

HP BL460c Gen9 Intel® Xeon® E5-2637v3 (3.5GHz/4-core/15MB/135W) FIO
Processor Kit

765268-L21

HP BL460c Gen9 Intel® Xeon® E5-2697v3 (2.6GHz/14-core/35MB/145W) FIO
Processor Kit

767049-L21

HP BL460c Gen9 Intel® Xeon® E5-2667v3 (3.2GHz/8-core/20MB/135W) FIO
Processor Kit

773123-L21

HP BL460c Gen9 Intel® Xeon® E5-2643v3 (3.4GHz/6-core/20MB/135W) FIO
Processor Kit

773124-L21

HP BL460c Gen9 Intel® Xeon® E5-2699v3 (2.3GHz/18-core/45MB/145W) FIO
Processor Kit

779795-L21

NOTE: 

DIMM slots 4 and 5 are not accessible when either the E5-2699 v3, the

E5-2697 v3, the E5-2643 v3, the E5-2637 v3, or the E5-2667 v3 is used. In a 2
processor configuration, there are twelve (12) total available DIMM slots.

NOTE: 

For the maximum supported memory speeds for each processor listed

above, please reference the 'Memory Speed by Processor Model' table in the
Memory section of the QuickSpecs.

NOTE: 

HT indicates that the processor model supports Intel® Hyper-Threading

Technology.

NOTE: 

Turbo indicates the maximum potential frequency when using Intel®

Turbo Boost Technology. The frequency boost increment is dependent on the
processor SKU and the number of active cores. In general, a higher boost
increment is obtained when fewer cores are active.

NOTE: 

DDR4 speed is the maximum memory speed of the processor. Actual

memory speed may depend on the quantity and type of DIMMs installed.

NOTE: 

Supports 1 or 2 processors. Mixing different processor models is not

supported.

NOTE: 

For the Intel® C610 Chipset E5-2600 v3 Series, the letter preceding the

model number indicates the Product Line (E3, E5, E7); 2600x, 2 = number of
CPUs in a Node, 6 is socket/segment designation, 00 = Processor SKU, and x =
L for low power SKUs.

NOTE: 

The BL460c Gen9 includes two I/O mezzanine expansion slots. A

processor must be installed in processor slot 1 for access to the first mezzanine
expansion slot (expansion slot 1). A processor must be installed in processor
slot 2 for access to the second mezzanine expansion slot (expansion slot 2).

NOTE: 

All processors within the server must be identical.

NOTE: 

All processors support Intel® Hyper-Threading and Intel® Turbo Boost

Technologies except the E5-2603 v3 and E5-2609 v3.

NOTE: 

The letter "L" following the model number indicates denotes lower

wattage.

NOTE: 

The processor model as well as the memory configuration determines

the maximum speed memory can operate. Please see the see the "Memory"
section later in this document.

HP Memory

NOTE: 

HP memory from previous generation servers (DDR3) is not compatible

with this server. HP SmartMemory is required to realize the memory
performance improvements and enhanced functionality listed in this document

QuickSpecs

HP ProLiant BL460c Generation 9 (Gen9) Server

Blade

Configuration Information - Factory Integrated Models

DA - 15052   Worldwide QuickSpecs — Version 1 — 9.9.2014

Page  20