3

· If you cannot find the appropriate mounting location, consult your car dealer or your nearest dealer before mounting.
CAUTION: Take extreme caution when working near the gas tank, gas lines, brake or hydraulic lines and electrical wiring.

Mounting the speakers

Installation kits are available from your dealer or local stereo shop to help make your installation easy. These kits also give your installation a clean, custom
appearance. Questions about installations methods please consult a professional auto sound dealer/installer for assistance.

· Choose the place of installation for acoustic system. For most acoustic system stipulated regular places in the automobile approach. In this case you need

to know only assembly depth. Before installation acoustic system check up their assembly depth.

· At a choice of a non-standard arrangement of speakers at which it is necessary to cut them in panels of the automobile, use a mould (not included). For

achievement of ideal arrangement of acoustic system keep up geometry of a mould, as it is very important for correct installation of your system

=94 mm, Ø =5 mm).

· If it will be necessary to cut steel, reinstall the cosmetic panel in place and use the hole you have previously cut as a template. This will help to insure

proper cutting and a good fit. Now, mark the locations for the speakers mounting screws, remove the panel and drill the screw holes. When finished you
may replace the panel.

· After cutting and drilling all holes, inspect the mounting areas for any metal burrs or rough edges. File any area that may interfere with the mounting of

the speaker.

· Clean any metal shavings from the mounting area and check for areas in which water may enter the speaker cavity.  Treat the area for water protection

when necessary.