EN

8

*

 Only available in selected models.

Adjusting the height of the upper rack

In order to make it easier to arrange the crockery, the upper rack 
may be moved to a higher or lower position.

The height of the upper rack should be adjusted WHEN THE 
RACK IS EMPTY.
NEVER raise or lower the rack on one side only.

If the rack is equipped with a 

Lift-Up

device

*

 (see figure)

, lift 

it up by holding its sides. To restore the lower position, press 
the levers (

A

) at the sides of the rack and follow the rack down.

Unsuitable crockery

•  Wooden crockery and cutlery.
•  Delicate decorated glasses, artistic handicraft and antique 

crockery. Their decorations are not resistant.

•  Parts  in  synthetic  material  which  do  not  withstand  high 

temperatures.

•  Copper and tin crockery.
•  Crockery soiled with ash, wax, lubricating grease or ink.
The colours of glass decorations and aluminium/silver pieces can 
change and fade during the washing process. Some types of 
glass (e.g. crystal objects) can become opaque after a number 
of wash cycles too. 

Damage to glass and crockery

Caused by:

•  Type of glass and glass production process.
•  Chemical composition of detergent.
•  Water temperature of rinse cycle.

Tips:

•  Only  use  glasses  and  porcelain  guaranteed  by  the  

manufacturer as dishwasher safe.

•  Use a delicate detergent suitable for crockery.
•  Collect glasses and cutlery from the dishwasher as soon as  

the wash cycle is over.

The upper rack can be adjusted for height based on requirements: 
high position to place bulky crockery in the lower rack and low 
position to make the most of the tip-up compartments/sectors  
by creating more space upwards.

Tip-up compartments with adjustable position

The side tip-up compartments can be positioned at three 
different heights to optimize the arrangement of crockery inside 
the rack.
Wine glasses can be placed safely in the tip-up compartments 
by inserting the stem of each glass into the corresponding slots.

Cutlery tray

*

Some dishwasher models are fitted with a sliding tray which 
can be used to hold serving utensils or small cups. For 
optimum washing performance, avoid positioning bulky 
crockery directly below the tray. 
The cutlery tray can be removed 

(see Figure).

Before loading the tray, make 
sure the supports are prop-
erly coupled to the upper rack  

(see Figure).