![background image](/i/infiniti/148678/infiniti-ex35-2010/h/infiniti-ex35-2010-049.png)
Front-facing
Follow these steps to install a front-facing child
restraint using the vehicle seat belt in the rear
seat or in the front passenger seat:
1.
If you must install a child restraint in the
front seat, it should be placed in a front-
facing direction only. Move the seat to the
rearmost position. Child restraints for in-
fants must be used in the rear-facing direc-
tion and therefore must not be used in the
front seat.
2. Position the child restraint on the seat.
Always follow the child restraint manufac-
turer’s instructions.
The back of the child restraint should be
secured against the vehicle seatback.
If necessary, adjust or remove the head
restraint/headrest to obtain the correct
child restraint fit. (See “HEAD RESTRAINTS”
earlier in this section.)
If the head restraint/headrest is removed,
store it in a secure place. Be sure to reinstall
the head restraint/headrest when the child
restraint is removed. If the seating position
does
not
have
an
adjustable
head
restraint/headrest and it is interfering with
the proper child restraint fit, try another
seating position or a different child re-
straint.
3. Route the seat belt tongue through the
child restraint and insert it into the buckle
until you hear and feel the latch engage.
Be sure to follow the child restraint manu-
facturer’s instructions for belt routing.
Front-facing (front passenger seat) — step 1
SSS0640
Front-facing — step 3
SSS0360B
1-30
Safety — Seats, seat belts and supplemental restraint system
췽
—
—
07/15/09—tbrooks
墍