Инструкция для INFINITI EX35 (2010)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

INDICATORS FOR OPERATION
1. Engine start operation indicator

This indicator appears when the selector lever
is in the P (Park) position.

This indicator means that the engine will start
by pushing the ignition switch with the brake
pedal depressed.

2. Steering lock release malfunction
indicator

This indicator appears when the steering wheel
cannot be released from the LOCK position.

If this indicator appears, push the push-button
ignition switch while lightly turning the steering
wheel right and left.

3. Intelligent Key insertion indicator

This indicator appears when the Intelligent Key
needs to be inserted into the Intelligent Key
port. (For example, the Intelligent Key battery is
discharged.)

If this indicator appears, insert the Intelligent
Key into the Intelligent Key port in the correct
direction.

(See

“PUSH-BUTTON

IGNITION

SWITCH” in the “5. Starting and driving” sec-
tion.)

4. Intelligent Key removal indicator

This indicator appears when the driver’s door is
opened with the ignition switch in the OFF or
LOCK position and the Intelligent Key placed in
the Intelligent Key port. A key reminder chime
also sounds.

If this indicator appears, remove the Intelligent
Key from the Intelligent Key port and take it with
you when leaving the vehicle.

5. NO KEY warning

This warning appears in either of the following
conditions.

No key inside the vehicle :

The warning appears when the door is closed
with the Intelligent Key left outside the vehicle
and the ignition switch in the ACC or ON
position. Make sure that the Intelligent Key is
inside the vehicle.

Unregistered Intelligent Key :

The warning appears when the ignition switch
is pushed from the LOCK position and the
Intelligent Key cannot be recognized by the
system. You cannot start the engine with an
unregistered key. Use the registered Intelligent
Key.

See “INTELLIGENT KEY SYSTEM” in the “3. Pre-
driving checks and adjustments” section for
more details.

6. SHIFT “P” warning

This warning appears when the ignition switch is
pushed to stop the engine with the selector lever
in any position except the P (Park) position.

If this warning appears, move the selector lever
to the P (Park) position or push the ignition
switch to the ON position.

An inside warning chime will also sound. (See
“INTELLIGENT KEY SYSTEM” in the “3. Pre-
driving checks and adjustments” section.)

7. “PUSH” warning

This warning appears when the selector lever is
moved to the P (Park) position with the ignition
switch in the ACC position after the SHIFT “P”
warning appears.

To push the ignition switch to the OFF position,
perform the following procedure:

SHIFT “P” warning

→

(Move the selector lever

to “P”)

→

PUSH warning

→

(Push the ignition

switch

→

ignition switch position is turned to