![background image](/i/infiniti/149293/infiniti-g37-coupe-2010/h/infiniti-g37-coupe-2010-369.png)
Getting the spare tire and tools
Raise the trunk floor cover
䊊
1
using the tab
䊊
A
.
Remove jacking tools located inside the trunk
as illustrated.
The spare tire is located under the jacking tools.
Remove the cap
䊊
2
holding the spare tire.
Jacking up the vehicle and removing
the damaged tire
WARNING
●
Never get under the vehicle while it is sup-
ported only by the jack. If it is necessary to
work under the vehicle, support it with
safety stands.
●
Use only the jack provided with your vehicle
to lift the vehicle. Do not use the jack pro-
vided with your vehicle on other vehicles.
The jack is designed for lifting only your ve-
hicle during a tire change.
●
Use the correct jack-up points. Never use any
other part of the vehicle for jack support.
●
Never jack up the vehicle more than
necessary.
●
Never use blocks on or under the jack.
●
Do not start or run the engine while vehicle is
on the jack, as it may cause the vehicle to
move. This is especially true for vehicles
with limited slip differentials.
●
Do not allow passengers to stay in the ve-
hicle while it is on the jack.
Carefully read the caution label attached to the
jack body and the following instructions.
Jacking tools — Sedan
SCE0659
Jacking tools — Coupe
SCE0695
Spare — Sedan and Coupe
SCE0702
6-4
In case of emergency
췽
—
—
04/21/10—debbie
墍