Automatic anti-glare type
The inside mirror is designed so that it auto-
matically changes reflection according to the
intensity of the headlights of the following
vehicle.
The anti-glare system will be automatically
turned on when the ignition switch is pushed to
the ON position.
When the anti-glare system is turned on, the
indicator light
䊊
A
will illuminate and excessive
glare from the headlights of the vehicle behind
you will be reduced.
Push the “
䡩
” switch
䊊
C
to make the inside
rearview mirror operate normally. The indicator
light will turn off. Push the “I” switch
䊊
D
to turn
the system on.
Do not allow any object to cover the sensors
䊊
E
or apply glass cleaner on them. Doing so will
reduce the sensitivity of the sensor, resulting in
improper operation.
For the compass (if so equipped) operation, see
“COMPASS” in the “2. Instruments and con-
trols” section.
For the HomeLink
姞
Universal Transceiver opera-
tion,
see
“HomeLink
姞
UNIVERSAL
TRANS-
CEIVER” in the “2. Instruments and controls”
section.
OUTSIDE MIRRORS
WARNING
Objects viewed in the outside mirror on the
passenger side are closer than they appear. Be
careful when moving to the right. Using only
this mirror could cause an accident. Use the
inside mirror or glance over your shoulder to
properly judge distances to other objects.
SPA2450
SPA2319
3-26
Pre-driving checks and adjustments
췽
—
—
04/21/10—debbie
墍