![background image](/i/infiniti/148602/infiniti-g37-sedan-2010/h/infiniti-g37-sedan-2010-414.png)
HEADLIGHTS
Replacing
Xenon headlight bulb :
WARNING
HIGH VOLTAGE
When xenon headlights are on, they produce a
high voltage. To prevent an electric shock,
never attempt to modify or disassemble. Al-
ways have your xenon headlights replaced at
an INFINITI retailer. For additional information,
see “HEADLIGHT AND TURN SIGNAL SWITCH” in
the “2. Instruments and controls” section.
Use the same number and wattage shown in the
following chart as originally installed.
If replacement is required, see an INFINITI re-
tailer.
Fog may temporarily form inside the lens of the
exterior lights in the rain or in a car wash. A
temperature difference between the inside and
the outside of the lens causes the fog. This is
not a malfunction. If large drops of water collect
inside the lens, contact an INFINITI retailer.
EXTERIOR AND INTERIOR LIGHTS
Sedan
Item
Wattage (W)
Bulb No.
Headlight*
High/Low beams (xenon)
35
D2S
Front turn signal light*
28
7444NA
Front fog light*
35
H8
Clearance light*
8
7444NA
Front side marker light*
5
WY5W
Rear combination light*
back-up
16
W16W
turn signal
21
W21W
stop/tail/side marker
LED
—
License plate light*
5
W5W
Map light
8
—
Rear personal light
8
—
Vanity mirror light
2
—
Step light*
8
—
Trunk light*
3.4
—
High-mounted stop light*
LED
—
*: See an INFINITI retailer for replacement.
NOTE: Always check with the Parts Department at an INFINITI retailer for the latest information about
parts.
Maintenance and do-it-yourself
8-25
췽
—
—
04/21/10—debbie
墍