![background image](/i/jvc/165593/jvc-kd-dv4207/h/jvc-kd-dv4207-023.png)
ENGLISH
SETTINGS
23
3
Select or adjust the selected PSM item.
4
Repeat steps
2
and
3
to adjust other
PSM items if necessary.
5
Finish the procedure.
You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
Enter the PSM settings.
2
Select a PSM item.
General settings — PSM
Continued on the next page
Indication
Item
Setting, [reference page]
DEMO
Display demonstration
•
DEMO ON
[Initial]
•
DEMO OFF
: Display demonstration will be activated automatically if no
operation is done for about 20 seconds, [5].
: Cancels.
CLOCK H
Hour adjustment
0
–
23
(
1
–
12
)
[Initial: 0 (0:00)]
: See also page 5 for setting.
CLOCK M
Minute adjustment
00
–
59
[Initial: 00 (0:00)]
: See also page 5 for setting.
24H/12H
Time display mode
•
12H
•
24H
[Initial]
: See also page 5 for setting.
CLK ADJ
Clock adjustment
•
AUTO
[Initial]
•
OFF
: The built-in clock is automatically adjusted using the CT (clock
time) data in the RDS signal.
: Cancels.
AF-REG
*
1
Alternative frequency/
regionalization reception
•
AF
[Initial]
•
AF REG
•
OFF
: When the currently received signals become weak, the unit
switches to another station or service (the programme may
differ from the one currently received), [11, 19].
: When the currently received signals become weak, the unit
switches to another station broadcasting the same programme.
: Cancels (not selectable when “DAB AF” is set to “AF ON”).
PTY-STBY
PTY standby
OFF
[Initial], PTY
codes (see page 10)
: Activates PTY Standby Reception with one of the PTY codes,
[11, 19].
TA VOL
Traffic announcement
volume
VOL 15
[Initial]
: VOL 00 – VOL 30 or 50
*
2
, [11].
EN22-27_KD-DV4207[EE]3.indd 23
EN22-27_KD-DV4207[EE]3.indd 23
12/11/05 2:10:42 PM
12/11/05 2:10:42 PM